Bone-eating (also known as osteophagia), found in wild animals, is primarily recognized as a means to supplement phosphorus and calcium intake. Herein, we describe a novel function of bone-eating in detoxifying heavy metal ions through the dissolution and co-precipitation of bone minerals as they travel through the gastrointestinal (GI) tract. In this study, cadmium (Cd), a heavy metal ion, served as a toxic model. We demonstrated that hydroxyapatite (HAp), the major calcium phosphate (CaP) in bone, dissolves in the stomach and acts as a co-precipitant in the intestine for Cd detoxification. We compared HAp to a common antidote, activated charcoal (AC), which did not precipitate within the GI tract. In vitro experiments showed that HAp dissolves under acidic conditions and, upon return to a neutral environment, efficiently re-sequesters Cd. Similarly, oral administration of HAp effectively prevented Cd absorption and accumulation, resulting in enhanced Cd excretion in the feces when compared to AC. A co-precipitating CaP in the GI tract could serve as an excellent detoxification system, as it helps prevent the accumulation of toxic substances and aids in developing appropriate strategies to reduce tissue toxicity. Moreover, understanding this detoxification system would be a valuable indicator for designing efficient detoxification materials.

Soil fertility and phosphorus management by bone apatite amendment are receiving increasing attention, yet further research is needed to integrate the physicochemical and mineralogical transformation of bone apatite and their impact on the supply and storage of phosphorus in soil. This study has examined bone transformation in the field over a span of 10-years using a set of synchrotron-based microscopic and spectroscopic techniques. Transmission X-ray microscopy (TXM) observations reveal the in-situ deterioration of bone osteocyte-canaliculi system and sub-micron microbial tunneling within a year. Extensive organic decomposition, secondary mineral formation and re-mineralization of apatite are evident from the 3rd year. The relative ratio of (v₁ + v₃) PO₄^3- to v₃ CO₃^2- and to amide I increase, and the v_3c PO₄^3- peak exhibits a blue-shift in less than 3 years. The carbonate substitution of bone hydroxyapatite (HAp) to AB-type CHAp, and phosphate crystallographic rearrangement become apparent after 10 years' aging. The overall CO₃^2- peak absorbance increases over time, contributing to a higher acid susceptibility in the aged bone. The X-ray Photoelectron Spectroscopy (XPS) binding energies for Ca (2p), P (2p) and O (1s) exhibit a red-shift after 1 year because of organo-mineral interplay and a blue-shift starting from the 3rd year as a result of the de-coupling of mineral and organic components. Nutrient supply to soil occurs within months via organo-mineral decoupling and demineralization. More phosphorus has been released from the bones and enriched in the associated and adjacent soils over time. Lab incubation studies reveal prominent secondary mineral formation via re-precipitation at a pH similar to that in soil, which are highly amorphous and carbonate substituted and prone to further dissolution in an acidic environment. Our high-resolution observations reveal a stage-dependent microbial decomposition, phosphorus dissolution and immobilization via secondary mineral formation over time. The active cycling of phosphorus within the bone and its interplay with adjacent soil account for a sustainable supply and storage of phosphorus nutrients.

The applicability of bone char as a long-term phosphorus nutrient source was assessed by integrating their mineral transformation and physicochemical properties with their dissolution behavior. We have explored synchrotron-based spectroscopic and imaging techniques (FTIR, XRD, and TXM) to investigate the physicochemical changes of bone and bone char along a charring temperature gradient (300-1200 °C) and used a lab incubation experiment to study their dissolution behaviors in solutions of different pH (4, 6, and 6.9). The thermal decomposition of inorganic carbonate (CO₃^2-) and the loss of organic components rendered a crystallographic rearrangement (blueshift of the PO₄^3- peak) and mineral transformation with increasing temperatures. The mineral transformation from B-type to AB- and A-type carbonate substitution occurred mainly at <700 °C, while the transformation from carbonated hydroxyapatite (CHAp) to more mineralogically and chemically stable HAp occurred at >800 °C. The loss of inorganic carbonate and the increase of structural OH^- with increasing temperatures explained the change of pH buffering capacity and increase of pH and their dissolution behaviors. The higher peak area ratios of phosphate to carbonate and phosphate to amide I band with increasing temperatures corroborated the higher stability and resistivity to acidic dissolution by bone chars made at higher temperatures. Our findings suggest that bone char made at low to intermediate temperatures can be a substantial source of phosphorus for soil fertility via waste management and recycling. The bone char made at 500 °C exhibited a high pH buffering capacity in acidic and near-neutral solutions. The 700 °C bone char was proposed as a suitable liming agent for raising the soil pH and abating soil acidity. Our study has underpinned the systematic changes of bone char and interlinked the charring effect with their dissolution behavior, providing a scientific base for understanding the applicability of different bone chars as suitable P-fertilizers.

The aim of this study was to assess, through biological analysis, the local effects and osseointegration of dental implants incorporating surface micro/nanofeatures compared with implants of identical design without surface treatment.

Known to impact bone cell behavior, surface chemical and topography modifications target improved osseointegration and long-term success of dental implants. Very few studies assess the performance of implants presenting both micro- and nanofeatures in vivo on the animal models used in preclinical studies for medical device certification.

Implant surfaces were characterized in terms of topography and surface chemical composition. After 4 weeks and 13 weeks of implantation in sheep femoral condyles, forty implants were evaluated through micro-computed tomography, histopathologic, and histomorphometric analyses.

No local adverse effects were observed around implants. Histomorphometric analyses showed significantly higher bone-to-implant contact in the coronal region of the surface-treated implant at week 4 and week 13, respectively, was 79.3 ± 11.2% and 86.4 ± 6.7%, compared with the untreated implants (68.3 ± 8.8% and 74.8 ± 13%). Micro-computed tomography analyses revealed that healing patterns differed between coronal and apical regions, with higher coronal bone-to-implant contact at week 13. Histopathologic results showed, at week 13, bone healing around the surface-treated implant with undistinguishable defect margins, while the untreated implant still presented bone condensation and traces of the initial drill defect.

Our results suggest that the surface-treated implant not only shows no deleterious effects on local tissues but also promotes faster bone healing around the implant.

Critically sized bone defects are often compounded by infectious complications. The standard of care consists of bone autografts with systemic antibiotics. These injuries and treatments lead to donor site morbidity, antibiotic resistant strains of bacteria, and often end stage amputation. This study proposes an alternative to the autograft using a porous, hydroxyapatite (HA) scaffold evaluated with and without infection and antibiotics. Twenty-four New Zealand white rabbits received either our HA scaffold or a pulverized autograft (PBA) within a surgically created critical-sized defect in the femur. The two grafts were evaluated in either septic or aseptic defects and with or without antibiotic treatment. The HA scaffolds were characterized with micro computed tomography. Post-euthanasia, micro computed tomography, histology, and white blood cells component analysis were completed. The HA had significantly greater (p < .001) mineralization to total volume than the PBA groups with 27.56% and 14.88%, respectively, and the septic HA groups were significantly greater than the aseptic groups both with and without antibiotics (p = .016). The bone quality denoted by bone mineral density was also significantly greater (p < .001) in the HA groups (67.01 ± 0.38 mgHA/cm³ ) than the PBA groups (64.66 ± 0.85 mgHA/cm³ ). The HA scaffold is a viable alternative to the bone autograft in defects with and without infection as shown by the quality and quantity of bone.

The composting is an aerobic, microorganism-mediated, solid-state fermentation process by which different organic materials are transformed into more stable compounds. The product obtained is the compost, which contributes to the improvement of physical, chemical and microbiological properties of the soil. However, the compost usage in agriculture is constrained because of its long-time action and reduced supply of nutrients to the crops. To enhance the content of nutrients assimilable by the plants in the compost, its supplementation with nutrients and inoculation with microorganisms have been proposed. The objective of this work was to review the state of the art on compost supplementation with nutrients and the role played by the microorganisms involved (or added) in their transformation during the composting process. The phases of composting are briefly compiled and different strategies for supplementation are analyzed. The utilization of nitrogenous materials and addition of microorganisms fixing nitrogen from the atmosphere or oxidizing ammonia into more assimilable for plants nitrogenous forms are analyzed. Several strategies for nitrogen conservation during composting are presented as well. The supplementation with phosphorus and utilization of microorganisms solubilizing phosphorus and potassium are also discussed. Main groups of microorganisms relevant during the composting process are described as well as most important strategies to identify them. In general, the development of this type of nutrient-enriched bio-inputs requires research and development not only in the supplementation of compost itself, but also in the isolation and identification of microorganisms and genes allowing the degradation and conversion of nitrogenous substances and materials containing potassium and phosphorus present in the feedstocks undergoing the composting process. In this sense, most important research trends and strategies to increase nutrient content in the compost are provided in this work.

To understand the correlation of the acidic monomer/hydroxyapatite (HAp) reaction with the photopolymerization behaviour of self-etching adhesives with different aggressiveness.

Two commercial self-etching adhesives the strong Adper Prompt L-Pop (APLP, pH ~ 0.8) and the mild Adper Easy Bond (AEB, pH ~ 2.5) were used. HAp powders were incorporated into both adhesives to acquire solutions with concentrations of 0, 1, 3, 5, 7 wt%. The attenuated total reflectance Fourier transform infrared (ATR/FT-IR) technique was employed to collect the in situ spectra during light-curing, from which the degree of conversion (DC) and polymerization rate (PR) were calculated. The pH of each tested solution was also measured.

Without HAp incorporation, the DC and PR of the strong APLP (7.8% and 0.12%/s, respectively) were much lower than those of the mild AEB (85.5% and 5.7%/s, respectively). The DC and PR of APLP displayed an apparent increasing trend with the HAp content. For example, the DC increased from 7.8% to 58.4% and the PR increased from 0.12 to 3.8%/s when the HAp content increased from 0 to 7 wt%. In contrast, the DC and PR of AEB were much less affected by the HAp content. The observations were correlated well with the spectral and pH changes, which indicated that APLP underwent a higher extent of chemical reaction with HAp than AEB.

The results disclosed the important role of the acidic monomer/HAp chemical reaction in improving the photopolymerization of the strong (low-pH) self-etching adhesives such as APLP. The phenomenon of polymerization improvement strongly depended on the adhesive aggressiveness.

Eight dissolution models of calcium apatites (both fluorapatite and hydroxyapatite) in acids were drawn from the published literature, analyzed and discussed. Major limitations and drawbacks of the models were conversed in details. The models were shown to deal with different aspects of apatite dissolution phenomenon and none of them was able to describe the dissolution process in general. Therefore, an attempt to combine the findings obtained by different researchers was performed which resulted in creation of the general description of apatite dissolution in acids. For this purpose, eight dissolution models were assumed to complement each other and provide the correct description of the specific aspects of apatite dissolution. The general description considers all possible dissolution stages involved and points out to some missing and unclear phenomena to be experimentally studied and verified in future. This creates a new methodological approach to investigate reaction mechanisms based on sets of affine data, obtained by various research groups under dissimilar experimental conditions.

New experimental data about surface processes of interaction between natural apatite and phosphoric acid solutions were obtained by scanning electron microscopy, Auger electron spectroscopy, and IR reflection spectroscopy. The interaction was found to occur nonstoichiometrically (incongruently) on the very thin surface layer of apatite. The experimental data obtained were compared and extended with results taken from literature. The following sequence of ionic detachment from the surface of apatite to a solution was suggested: first fluorine for fluorapatite or hydroxyl for hydroxyapatite, next calcium, and afterward phosphate. A new chemical mechanism of apatite dissolution was proposed as a result. The mechanism for the first time described the surface irregularity of the dissolution process at the nanolevel. A comparison between this new dissolution mechanism and earlier mechanisms described in the literature was made.