In-depth knowledge of the anatomical structure of the root canal system is fundamental for successful endodontic treatment. This research aimed to evaluate the root canal structures of lower premolars in the Saudi western demographic via Cone Beam Computed Tomography (CBCT) scans. 760 CBCT scans were reviewed, which incorporated 2747 mandibular premolar teeth. SPSS was employed for descriptive statistics and Pearson chi-square tests. The Kappa tests were executed for intra- and inter-observer consistency. The number of roots, canals, and canal configurations based on Vertucci's classification were assessed. The study further explored the prevalence, patterns, and variations of the root canal systems, considering gender-based variations and bilateral resemblance. Predominantly, mandibular premolars possessed a single root, though a minority displayed two or three roots. The occurrence of multiple canals was also on the lower side, with the type I canal pattern emerging predominantly. Gender-based distinctions were evident, as males exhibited a higher frequency of two-rooted premolars and multiple canals than females. It was noted that the anatomical differences were more in the mandibular first premolars than in the second premolars. A significant bilateral consistency was observed, with most teeth showcasing consistent root and canal numbers. This research offers essential perspectives on the diverse nature and variability of root canal anatomy within the Saudi Western cohort, facilitating better understanding and treatment planning in endodontics.

This study aimed to compare cone beam computed tomography (CBCT) and microcomputed tomography (μCT) data to evaluate the micromorphological structure of healing bone in defects created on rabbit mandibles at different stages.

Residual rabbit mandibular alveolar bone tissues from another animal study involving 18 rabbits were utilized. In the prior study, 10 × 4 mm bone cavities were created, left to heal naturally, and the animals were sacrificed after 21, 45, and 90 days. In this study, CBCT and μCT imaging were performed on the excised defect regions. The micromorphometry parameters including bone-volume fraction (BV/TV), bone-surface density (BS/TV), fractal dimension, connectivity density (Conn. Dn.), trabecular thickness (Tb.Th), and trabecular separation (Tb.Sp) were examined by ImageJ (US National Institutes of Health, Bethesda, MD, USA). Paired two-sample t‑tests, Wilcoxon test, and Bland-Altman plots were performed.

Differences in the parameters Conn. Dn., fractal dimension, Tb.Th, and Tb.Sp were observed between CBCT and μCT on day 21. By day 45, no significant differences were noted in BV/TV, BS/TS, Tb.Th, and Tb.Sp. On day 90, all measured parameters showed no statistically significant differences between CBCT and μCT. Bland-Altman analysis showed an agreement for most parameters (BV/TV, BS/TV, fractal dimension, Tb.Th, and Tb.Sp) after 21, 45, and 90 days, with minimal biases emerging over time, while a more notable divergence in Conn. Dn. was observed.

CBCT can be used for micromorphological analyses on days 45 and 90 of bone healing as there were no differences between CBCT and μCT during these periods.

To provide a narrative overview of commercially available CBCT devices, highlight the wide range of technical features and their impact on image quality and diagnostic performance, and develop decision support charts to guide clinicians in selecting appropriate CBCT parameters for different dental specialties.

Data collection involved reviewing published articles on CBCT devices and accessing manufacturer websites. Additional manufacturers were identified through a literature search and by attending scientific and commercial events held in 2023 and 2024. Information on CBCT features was obtained from websites, manuals, and inquiries until February of 2025. Data were categorized and analyzed descriptively and quantitatively to recommend device requirements for dental specialties. Decision support charts were developed for each specialty based on common indications and technical parameters (e.g., field-of-view, scout need, spatial resolution, X-ray exposure parameters, and post-processing tools).

Eighty-seven commercially available CBCT devices from 34 manufacturers across 11 countries were identified, with information confirmed for only 10 companies. Missing data varied, however FOV and voxel size were commonly reported. Tube voltage ranged from 50-120 kV, and tube current mostly varied between 1-17 mA. Dose considerations varied widely, with dose-product-area ranging from 10 to 5600 mGy.cm2 and typical effective dose estimates from 3 to 500 µSv. Decision support charts were created, outlining necessary image acquisition and reconstruction-related parameters for prosthodontics and implant dentistry, periodontology, oral and maxillofacial surgery, pediatric dentistry and orthodontics, and endodontics.

This study provides an overview of the technical features of commercially available CBCT devices, highlighting gaps in reconstruction parameters and dose considerations. Tailored recommendations based on patient-specific needs are essential, with clinicians individualizing CBCT acquisition to optimize diagnostic accuracy and minimize biological risks.

This study provides valuable insights into commercially available CBCT devices in terms of their features and provides decision support chart to help clinicians select optimal technical parameters tailored to specific dental specialties.

The aim of this study is to assess the reliability of linear measurements obtained from STL models and three-dimensional hard-tissue models of the maxilla and mandible, both derived from CBCT images. The STL models are generated using both a software program and a web-based AI diagnostic tool, and these measurements are compared to those from the hard tissue models. One hundred CBCT scans were included in this study. DICOM files were imported into Maxilim® software to create hard-tissue models. An AI algorithm and Mimics software were also used to generate STL images. Five mandibular and three maxillary measurements were taken. Pairwise comparisons were made by performing the Tukey test, and absolute agreement among the three programs was assessed by using the intraclass correlation coefficient (ICC). The repeated measurements demonstrated high reliability for mandibular measurements (ICC: 0.902-0.999), while maxillary measurements showed more variability (ICC: 0.456-0.997), with poor reliability in DFPM using Mimics-STL (p = 0.071). ICC and Pearson correlation values were moderate for DIM, while others were good to excellent. Maxillary distances were less reliable, particularly for DFPM (Mimics-STL vs. Maxilim) and DSN (Mimics-STL vs. AI-STL). ANOVA revealed significant differences in DCP, DSN, DFI, DMF, and DFPM, with Maxilim yielding the highest mean values, except for DMF. 3D hard-tissue models provided higher measurement values than STL models. The significant variability observed in STL maxillary measurements suggests that anatomical complexity and segmentation algorithms influence measurement consistency. These findings highlight the importance of carefully selecting segmentation methodologies in clinical and research settings.

Background: Implant-prosthetic therapy requires a detailed assessment of the bone structure before designing a personalized treatment plan. Tooth extraction at the molar level is followed by a series of bone changes dependent on the patient's general condition and age and the area in which it was performed. The fractal analysis of cone beam computed tomography (CBCT) represents a way to assess the quality of post-extraction bone regeneration. The purpose of this study was to analyze the alveolar bone changes after tooth extraction using fractal analysis on CBCT images. Methods: This retrospective study included pre- and post-extraction CBCTs at 3 months of 60 patients who underwent 100 extractions of first and/or second molars. Fractal analysis on CBCT images was performed using ImageJ, and the data obtained from the measurements were statistically processed. A multiple regression model was used to assess factors influencing bone remodeling. Results: Fractal analysis performed on CBCT images showed that most patients experienced advanced bone remodeling, this being more pronounced in those from rural areas, in the vertical plane at the mandible and at the second molar. The multiple regression model showed that the factors that play an important role in predicting bone resorption are represented by age group (age above 56 years old is associated with less bone resorption), location (bone resorption is more pronounced at the mandible level), and molar (bone resorption for the second molar is higher). Conclusions: Post-extraction bone changes were influenced by the age of the patient and by the location of the extraction, with the maxilla and first molar having better fractal analysis values compared to the mandible and second molar. These results emphasize the importance of training implantologists in CBCT evaluation to improve personalized implant-prosthetic treatment decisions.

To understand the potential impact of periodontal disease on maxillary sinus health, this study aimed to evaluate the relationship between periodontal bone loss and maxillary sinus membrane thickness using cone beam computed tomography (CBCT).

Nine hundred thirty-nine maxillary posterior segment images from 527 subjects were retrospectively scanned via CBCT. A total of 826 premolar, 701 first molar and 817 s molar teeth were examined. The maxillary sinuses in each segment were divided into anterior, median and posterior regions according to the tooth roots they were associated with, and their membrane thicknesses were measured and categorized. The effects of age and gender on membrane thickness were evaluated. T tests and one-way ANOVA were used to analyze differences between groups, followed by post hoc Tukey tests for multiple comparisons. Additionally, correlation analyses were performed to investigate the relationships between the categorized membrane thicknesses and periodontal bone loss.

A significant positive correlation was found between maxillary sinus membrane thickness and periodontal bone loss in all three regions (p < 0.05). Periodontal bone loss was greater in regions with class IV membrane thickness (p < 0.001). Sinus membrane thickness and periodontal bone loss were greater in men and older people (p < 0.001).

This study found a relationship between maxillary sinus membrane thickness and bone loss due to periodontal disease in the maxillary posterior region. Considering the relationship between periodontal disease and sinus infections, it can be concluded that progressive and untreated periodontal disease may be associated with infections in close anatomical structures such as the maxillary sinus. These results may contribute to the development of clinical decisions and treatment plans in implantology practices.

Background: One of the parameters of maximum interest regarding the quality of the intraoral hard tissues is represented by the bone density, with direct clinical implications. The evaluation of this extremely important clinical parameter can be achieved by several imaging methods, of which the most known in dentistry is represented by the cone beam computed tomography (CBCT). Objectives: The purpose of the study is to obtain a quantitative analysis of bone mineral density changes in patients who underwent treatments of photobiomodulation (PBM), as complementary to a surgical approach in oral surgery and implantology. Methods: The study included the retrospective analysis of maxillary cone beam computed tomography of 28 patients without pathology or medication known to affect bone metabolism or its qualitative and quantitative properties. All patients from the study group followed the same laser PBM treatment protocol after placing dental implants; the PBM protocol implied the intraoral use of a gallium aluminum arsenide laser (GaAlAs) of 808 nm, 450 mW, in pulsed mode, administering an energy of 6 J in 3 points corresponding to each inserted dental implant-mesial, distal, and apical-totaling 18 J/implant. Treatment sessions were performed immediately postoperatively and at a subsequent distance of 48 h for 2 weeks (a total of eight sessions). For every patient, bone density was analyzed before and after PBM treatment, in the same areas of interest, within the same anatomical landmarks. A comparison was also made between the results obtained for the anterior maxilla and the posterior maxilla. All the measurements made were analyzed statistically, the results being presented in the dedicated section. Results: Based on the data analysis, the comparison between the lasered and non-lasered groups reveals that patients who underwent PBM showed a statistically significant improvement in bone mineral density, with the mean increasing from 530.91 HU before treatment to 842.55 HU after treatment (t-test: p < 0.001). In contrast, the non-lasered group showed no significant improvement, with a slight decrease in bone mineral density, as the mean dropped from 495.19 HU before treatment to 462.16 HU after treatment (t-test: p = 0.47). Conclusions: The study demonstrated results with statistical significance regarding the mineral bone density improvement of patients who underwent laser PBM treatment. This positive effect of laser therapy has been shown, both at the level of the vestibular cortical bone and at level of the trabecular bone, independent of the patient's sex, for the anterior maxilla and at the lateral areas also.

To explore the horizontal impact of extensive incisor retraction on alveolar bone and to investigate the relationship of changes in alveolar bone thickness (ΔBT) with horizontal retraction distance of the incisal edge (HRD) and horizontal retraction distance of alveolar ridge crest (HRD') in orthodontic treatment.

This retrospective study included 84 patients who underwent orthodontic extraction treatment, involving extensive incisor retraction (≥ 3 mm). Pre-treatment (T0) and post-treatment (T1) cone-beam computed tomography (CBCT) data were collected. The samples were divided into adult (> 18 years) and adolescent (≤ 18 years) groups. Changes in the horizontal alveolar bone thickness in the incisor region, as well as changes in HRD and HRD', were measured at T0 and T1. Data were statistically analyzed using SPSS 27.0, utilizing paired and independent samples t-tests.

After extensive retraction, both upper and lower central incisors exhibited increased buccal alveolar bone thickness, while lingual and total alveolar bone thicknesses decreased. The horizontal plane near the root apice exhibited overall thickening of the alveolar bone. The tooth roots consistently remained upright within the alveolar bone, maintaining a stable relative position. The magnitude of ΔBT was smaller compared to the changes in HRD and HRD'.

Alveolar bone thickness decreased during extensive retraction, especially near the alveolar crest, with less noticeable variations closer to the tooth root apices. The stable positioning of incisors within the alveolar bone indicates that the alveolar bone changes were primarily morphological, and suggests that partial tooth movement resulted from bone deformation. (Registration Number: ChiCTR2000034288; Approval Date: 01/07/2020).

Objectives This study investigated correlations between facial asymmetry and left-right differences in maxillary sinus size and volume, as well as their relationships with skeletal morphology. Methods The participants were 154 Japanese adults (56 men, 98 women) aged 18 to 38 years (mean age, 24.1 ± 5.3 years). Cone-beam computed tomography (CBCT) images were analyzed using InVivo™ 6 software (Anatomage, Inc., San Jose, CA, USA). Facial asymmetry was assessed at six landmarks: orbitale, condylion, and gonion (all bilateral); anterior nasal spine; deepest point in bony concavity (B point); and menton (at midline). Maxillary sinus height, width, length, and volume were measured. Participants were classified into skeletal classes (I, II, III) and vertical growth patterns (horizontal, average, vertical). Spearman's rank correlation coefficient was used to assess the relationships of these six facial asymmetry landmarks with differences in maxillary sinus linear measurements and volume. Results The facial asymmetry index was positively correlated with maxillary sinus length in the condylion region and height in the gonion region. As left-sided facial deviation increased, the right maxillary sinus became larger; conversely, as right-sided facial deviation increased, the left maxillary sinus became larger. Thus, the maxillary sinus on the nondeviated side tends to be larger. Vertical facial growth patterns showed greater maxillary sinus height and volume in the vertical growth group than in the average growth group. Conclusions Asymmetry in specific facial regions may be associated with region-specific variations in maxillary sinus morphology, and vertical skeletal patterns may influence maxillary sinus development. These findings offer insights into the relationship between facial asymmetry and maxillary sinus structure.

To conduct a narrative review of the published literature on the localization techniques to identify the best technique for the localization of supernumerary teeth.

An extensive search of literature published in English between January 1966 and May 2024 was conducted using the "Medline via PubMed" and "Cochrane database" databases. The keywords included in the search were "localization" "radiographs", and "impacted teeth", or "un-erupted teeth", or "supernumerary teeth" or "supernumerary tooth". The citation lists from the included articles were examined to identify additional reports and a hand search was also conducted. Kappa statistics were used for intra-examiner reliability.

The initial search yielded 4,864 citations, subsequently examined and supplemented by a hand search to find additional studies. Commonly used techniques for the localization of supernumerary teeth are the horizontal tube shift technique, vertical tube shift technique, vertex occlusal technique, and cone-beam computerized tomography.

The most commonly used localization techniques for supernumerary teeth are horizontal tube shift, vertex occlusal, vertical tube shift, and cone-beam computerized tomography. Conventional radiographs only provide two-dimensional views of 3-dimensional structures. Three-dimensional imaging alone can provide accurate data on impacted supernumerary teeth but, the need for this film has to be justified because of the higher radiation exposure.

To investigate the frequency of CBCT scans, the exposure settings, volume sizes and the patient demographics (age and sex) of patients undergoing CBCT scans in university-based dental hospitals in different European countries over a one-year period.

Eight University Dental Hospitals from eight countries in central and northern Europe agreed to collect data from their CBCT-databases. Exposure data including field of view (FOV), dose area product (DAP) and optimization settings plus (anonymous) age and sex of the patients were collected for the entire year 2023. In addition, centre- and healthcare-system- related characteristics were assembled. Data were statistically evaluated using R Statistical Software.

A total of 7320 CBCT-scans from eight centres and eight different CBCT-machines were evaluated. DAPs ranged between 34 and 4390mGycm2 (mean: 700.8mGycm2), kV between 60 kV and 120 kV. Patient age (range 4yrs to 97yrs) differed significantly between the centres, yet with a cumulative peak between 10 and 20yrs. Optimization protocols were observed for all centres, depending on their centre- and also healthcare-characteristics. 21 % of the scans applied some sort of special dose reduction means.

The overall age-peak between 10 and 20yrs highlights the need to optimized maxillofacial CBCT-protocols. The differences between the centres seem to be mainly related to healthcare-system and centre-related characteristics, which differ largely between the eight centres.

Objectives: Buccal cortical bone dimensions are crucial in dental radiology, as they impact orthodontic treatment outcomes. Changes in alveolar bone dimensions can result in malocclusion and require interdisciplinary approaches for correction. The accurate quantification of buccal bone dimensions is crucial for appropriate treatment planning and avoiding medico-legal issues. This study aimed to compare buccal bone height measurements between three-dimensional (3D) digital imaging and communications in medicine (DICOM) data and portable document format (PDF) cone beam computer topography reports for mandibular frontal teeth, testing the hypothesis of no difference in values between the two modalities. Methods: Each of the five observers performed a total of 720 height measurements (360 by DICOM and 360 by PDF), yielding a total of 3600 measurements overall. Results: Compared with the DICOM format, using PDF files was associated with a significantly greater rate of inability to carry out the measurements (8.8% vs. 3%, respectively, p < 0.001, chi-square). The average buccal bone height measured in the DICOM was 11.51 mm, which was significantly greater than the 10.35 mm measured in the PDF (p < 0.001). The mean height measured by the DICOM was consistently greater than that measured by the PDF, with highly significant differences in the findings of four of the examiners (p < 0.001). Conclusions: Viewing modality significantly affected the height of the buccal bone in the frontal mandibular area. Compared with the generated PDF reports, the 3D DICOM viewer performed better than the printed PDF and enabled more measurements in the target area.

Canine impaction is a common dental anomaly that requires a multidisciplinary approach, from diagnosis to treatment. The regular two-dimensional (2D) radiographs are able to visualize if the tooth is impacted, but unable to specifically localize it, and determine if there are any root resorptions associated to it. The cone-beam computed tomography (CBCT) is able to three-dimensionally determine its location, aiding to the diagnosis and treatment plan. The major disadvantage is the amount of radiation that is added to the patient and can be even more significant in pediatric patients. The intra-oral ultrasound (io-US) is a new non-invasive and non-radiating real-time chairside imaging method that has the potential to aid in locating the impacted tooth. This paper presents 4 cases that required a CBCT for the location and treatment planning of impacted maxillary canines and were also scanned with intra-oral ultrasound. The images were then compared to the CBCT exam for validation of the new method. Through these cases, we highlight the capability of the io-US to locate the impacted canines. Other advantages of io-US might include evaluation of soft tissue thickness and vasculature that are important for surgical planning and execution.

In this paper, the effect of thyroid collars on radiation dose during dental cone-beam computed tomography (CBCT) was evaluated using Monte Carlo simulations and to calculate the effective dose underestimated for the actual CBCT examination due to accounting only for the head and neck. Three thyroid collar models that covered the surface of the phantom were established according to the International Commission on Radiological Protection (ICRP) adult-male mesh-type reference computational phantoms, and a Particle and Heavy Ion Transport code System was used to calculate the equivalent and effective doses of ICRP phantom when different thyroid shielding protocols were used in NewTom VGi evo CBCT, considering one medium (12 × 8 cm) and one small (8 × 5 cm) fields of view (FOVs), and two centre positions were used for each FOV. In four CBCT scanning scenarios, thyroid shielding reduced the equivalent dose for many tissues. The results indicate that the portion of the thyroid collar that wraps around the neck has the main role in reducing the effective dose during dental CBCT examinations, and the higher the axial level of the top of the shielding, the better the effectiveness of the shielding. In this study, the underestimation of the effective dose due to considering only the head and neck was 3.1%-8.1%, and the underestimation was more pronounced in larger FOVs.

In dental imaging, Cone Beam Computed Tomography (CBCT) is a widely used imaging modality for diagnosis and treatment planning. Small dental scanning units are the most popular due to their cost-effectiveness. However, these small systems have the limitation of a small field of view (FOV) as the source and detector move at a limited angle in a circular path. This often limits the FOV size. In this study, we addressed this issue by modifying the source-detector trajectory of the small dental device. The main goal of this study was to extend the FOV algorithmically by acquiring projection data with optimal projection angulation and isocenter location rather than upgrading any physical parts of the device. A novel algorithm to implement a Volume of Interest (VOI) guided trajectory is developed in this study based on the small dental imaging device's geometry. In addition, this algorithm is fused with a previously developed off-axis scanning method which uses an elliptical trajectory, to compensate for the existing constraints and to further extend the FOV. A comparison with standard circular trajectory is performed. The FOV of such a standard trajectory is a circle of 11 cm diameter in the axial plane. The proposed novel trajectory extends the FOV significantly and a maximum FOV of 19.5 cm is achieved with the Structural Similarity Index Measure (SSIM) score ranging between (≈98-99%) in different VOIs. The study results indicate that the proposed source-detector trajectory can extend dental imaging FOV and increase imaging performance, which ultimately results in more precise diagnosis and enhanced patient outcomes.

The introduction of cone beam computed tomography (CBCT) in dentistry has given orthodontists the possibility of studying craniofacial structures in three dimensions. Despite the possibility to obtain lateral cephalograms synthesized from CBCT, this approach still does not provide a fully three-dimensional evaluation of the patient's anatomy. While there has been some success in adapting traditional two-dimensional cephalometric analyses to three dimensions, the specific application of Enlow's cephalometric analysis using CBCT remains unexplored.

This pilot study aims to introduce a novel approach for performing Enlow's vertical track analysis using CBCT images.

Eighteen CBCT images of skeletal Class I (ANB = 2 ± 2) subjects (12 males and 6 females, aged from 9 to 19 years) with no history of previous orthodontic treatment were selected. For each subject, 2D Enlow's vertical track analysis was performed on lateral cephalograms extracted from the CBCT images, and separately, 3D vertical track analysis was directly performed on the CBCT images. To validate the proposed method, we compared the differences between the posterior vertical counterpart (PVC) and the middle vertical counterpart (MVC), as well as between the middle vertical counterpart (MVC) and the anterior vertical counterpart (AVC), as obtained from both the two-dimensional and three-dimensional analyses. The Kolmogorov-Smirnov normality test was applied for each variable to check whether data were normally distributed and a paired Student's t-test was performed. The level of statistical significance was .05.

The comparison between three-dimensional PVC-MVC (-0.43 ± 0.37 cm) and two-dimensional PVC-MVC (-0.53 ± 0.36 cm) revealed no statistical difference (P = .27). Similarly, no significant difference (P = .28) was observed between two-dimensional MVC-AVC (-0.56 ± 0.34 cm) and three-dimensional MVC-AVC (-0.47 ± 0.37 cm).

The method proposed by this study to realize the vertical track analysis on 3D images is valid and superimposable on that described by Enlow on lateral cephalograms.

The present study aimed to provide and evaluate the efficiency of an artificial intelligence mechanism for detecting cystic lesions on cone beam computed tomography (CBCT) scans.

The CBCT image dataset consisted of 150 samples, including 50 cases without lesions, 50 dentigerous cysts (DC), and 50 periapical cysts (PC) based on both radiographic and histopathological diagnosis. The dataset was divided into a development set with 70 % of samples for training and validation and a final test set with the other 30 % of samples. Four images were obtained for each case, including panoramic, manually segmented panoramic, axial, and manually segmented axial images. A deep convolutional neural network (CNN) architecture was used for automatic lesion detection and diagnosing the type of cystic lesion. To increase the number of image samples and avoid overfitting, a data augmentation procedure was applied. Recall, precision, F1-score, and average precision (AP) values were measured for lesion detection performance, and sensitivity, specificity, and accuracy indicators from the confusion matrix were calculated for the lesion classification performance of the CNN model.

Mean average precision, recall, and F1-score for the detection of DCs and PCs were respectively, 0.87, 0.92, and 0.89 before data augmentation, and 0.93, 0.95, and 0.93, after the augmentation process. For the classification of DCs with data augmentation, sensitivity, specificity, accuracy, and AUC values were 96.4 %, 99.5 %, 97.3 %, and 0.98, respectively, and for PCs with augmentation, these values were 89.6 %, 98.9 %, 98.1 %, and 0.94, respectively. Lastly, for no lesion samples, sensitivity, specificity, accuracy, and AUC values were 100 %, 99.1 %, 99.4 %, and 0.99, respectively, by application of data augmentation.

Our developed deep learning-based CNN algorithm showed high accuracy, sensitivity, and precision values (more than 90 %) for detecting and classifying dentigerous and periapical cysts on CBCT images using data augmentation.

The objective of this study was to enhance the visibility of soft tissues on cone-beam computed tomography (CBCT) using a CycleGAN network trained on CT images.

Training and evaluation of the CycleGAN were conducted using CT and CBCT images collected from Aichi Gakuin University (α facility) and Osaka Dental University (β facility). Synthesized images (sCBCT) output by the CycleGAN network were evaluated by comparing them with the original images (oCBCT) and CT images, and assessments were made using histogram analysis and human scoring of soft-tissue anatomical structures and cystic lesions.

The histogram analysis showed that on sCBCT, soft-tissue anatomical structures showed significant shifts in voxel intensity toward values resembling those on CT, with the mean values for all structures approaching those of CT and the specialists' visibility scores being significantly increased. However, improvement in the visibility of cystic lesions was limited.

Image synthesis using CycleGAN significantly improved the visibility of soft tissue on CBCT, with this improvement being particularly notable from the submandibular region to the floor of the mouth. Although the effect on the visibility of cystic lesions was limited, there is potential for further improvement through refinement of the training method.

Background: This review aimed to critically appraise the most recent orthopedic literature around cone beam weightbearing computed tomography (WBCT), summarizing what evidence has been provided so far and identifying the main research trends in the area. Methods: This scoping review was performed on studies published between January 2013 and December 2023 on the Pubmed database. All studies (both clinical and nonclinical) in which WBCT had been used were critically analyzed to extract the aim (or aims) of the study, and the main findings related to the role of this imaging modality in the diagnostic pathway. Results: Out of 1759 studies, 129 were selected. One hundred five manuscripts (81%) dealt with elective orthopedic conditions. The majority of the analyses (88 studies; 84%) were performed on foot and ankle conditions, while 13 (12%) studies looked at knee pathologies. There was a progressive increase in the number of studies published over the years. Progressive Collapsing Foot Deformity (22 studies; 25%) and Hallux Valgus (19 studies; 21%) were frequent subjects. Twenty-four (19%) manuscripts dealt with traumatic conditions. A particular interest in syndesmotic injuries was documented (12 studies; 60%). Conclusions: In this review, we documented an increasing interest in clinical applications of weightbearing CT in the orthopedic field between 2013 and 2023. The majority of the analyses focused on conditions related to the foot and the ankle; however, we found several works investigating the value of WBCT on other joints (in particular, the knee).

Background Cone-beam computed tomography (CBCT), a cross-sectional imaging technique, is valuable for clinical diagnosis and creating effective treatment plans. CBCT can precisely examine the connection between the maxillary sinuses and the maxillary root apices. Oral radiologists must be aware of all potential incidental findings and should be diligent in thoroughly identifying and assessing possible underlying diseases. Aim To determine the prevalence of incidental maxillary sinus pathologies and their relationship to dental diseases. Materials and methods In the present retrospective study, CBCT scans from 300 subjects (encompassing 600 right and left maxillary sinuses), aged 18 to 70, were gathered from various CBCT centers to represent the Tamil Nadu population. The CBCT images were analyzed using proprietary software, which provided both a panoramic reconstruction view and multiplanar reformation modules, including axial, sagittal, and coronal slices. The entire sample size was classified as follows: Group 1, age groups of 18 to 25 years; Group 2, age groups of 26 to 35 years; Group 3, age groups of 36 to 45 years; Group 4, age groups of 46 to 55 years; Group 5, age groups of 56 to 65 years; Group 6, age groups of 66 to 70 years. The prevalence of incidental maxillary sinus findings was analyzed, and their relationship with periapical abscess, periapical granuloma, periapical cyst, and breach was assessed. Results There was a prevalence of 52.05% of cases that had incidental maxillary sinus findings. Among them, 53.43% were males and 50.65% were females. Maxillary sinus pathologies were more common in individuals between 46 and 55 years, i.e., Group 4. In 300 datasets, the frequency of incidental maxillary sinus findings on the right is 21.33%, on the left is 24%, in both is 6.67%, and absent in 48% of the cases. Mucosal thickening was observed in 30% of cases with a periapical abscess, 19.52% with a periapical granuloma, 25% with a periapical cyst, and 51.79% with a breach. Polypoidal mucosal thickening was present in 32.50% of cases with a periapical abscess, 13.79% with a periapical granuloma, 50% with a periapical cyst, and 23.21% with a breach. Opacification occurred in 37.50% of cases with a periapical abscess, 20.69% with a periapical granuloma, 25% with a periapical cyst, and 25% with a breach. Conclusion Dental professionals should have a bird's-eye view in treating chronic odontogenic infections close to the maxillary sinus. Early diagnosis and prompt treatment of odontogenic infections help prevent maxillary sinus pathologies.

This study aimed to propose a methodological approach for reducing the radiation dose in pediatric conebeam computed tomography (CBCT), focusing exclusively on balancing image quality with dose optimization.

The dose-area product (DAP) for exposure was reduced using copper-plate attenuation of an X-ray source. The thickness of copper (Cu) was increased from 0 to 2.2 mm, and 10 different DAP levels were used. The QUART DVT_AP phantom and pediatric radiologic dentiform were scanned under the respective DAP levels. The contrast-to-noise ratio (CNR), image homogeneity, and modulation transfer function (MTF) were analyzed using the QUART DVT_AP phantom. An expert evaluation (overall image grade, appropriateness of field of view, artifacts, noise, and resolution) was conducted using pediatric dentiform images. The critical DAP level was determined based on phantom and dentiform analysis results.

CNR and image homogeneity decreased as the DAP was reduced; however, there was an inflection point of image homogeneity at Cu 1.6 mm (DAP=138.00 mGy·cm2), where the value started increasing. The MTF showed constant values as the DAP decreased. The expert evaluation of overall image grades showed "no diagnostic value" for dentiform images with Cu 1.9-2.2 mm (DAP=78.00-103.33 mGy·cm2). The images with Cu 0-1.6 mm (DAP=138.00-1697.67 mGy·cm2) had a "good," "moderate," or "poor but interpretable" grade.

Reducing DAP beyond a 1.6-mm Cu thickness degraded CBCT image quality. Image homogeneity and clinical image grades indicated crucial decision points for DAP reduction in pediatric CBCT scans.

This study aimed to evaluate and compare palatal thickness in adults for the placement of mini-implants for miniscrew-assisted rapid palatal expansion (MARPE) appliances using cone-beam computed tomography (CBCT) in a sample of Iraqi-Kurdish people.

CBCT scans from 68 Kurdish patients, aged between 18 and 30 years, were assessed retrospectively. Of these, 37 were males and 31 were females. The measurements were performed at 3 mm from the mid-palatal suture. T-zone was selected for the anterior points, at the level of the palatal cusps of 2nd premolars, and the posterior point at the level of mesio-palatal cusps of 1st molars bilaterally. Palatal thickness of males and females bilaterally, as well as anterior and posterior areas, were measured and compared. An independent t-test was applied for comparison for normally distributed data, and the Mann-Whitney test was utilized for nonnormally distributed data. Additionally, Bonferroni correction was implemented for p-value adjustment.

The mean palatal thickness at the anterior area was 6.06 mm for males, 6.17 mm for females on the right side, 5.94 mm for males, and 5.99 mm for females on the left side. The mean palatal thickness at the posterior area was almost the same for both genders (4.40 mm for males and 4.44 mm for females) on the right side, 4.35 mm for males, and 4.54 mm for females on the left side. Statistically, no significant difference was recorded between males and females, as well as right and left sides in both anterior and posterior regions; however, a very highly statistically significant difference (p  < 0.001) was recorded when comparing total thickness, including both hard and soft tissue, between anterior and posterior regions.

CBCT proves a highly effective modality in assessing palatal thickness and suggesting ideal locations for orthodontic mini-screw placement. Our examination of palatal thickness in a sample of Iraqi-Kurdish individuals revealed no statistical difference between genders or sides, but significant variations were noted between anterior and posterior thicknesses. Comprehensive clinical and pre-expansion CBCT evaluations are crucial for precisely determining the optimal placement of MARPE devices in each patient, ensuring successful outcomes.

Medication-related osteonecrosis of the jaw (MRONJ) is a debilitating condition associated with antiresorptive and antiangiogenic medications that are frequently used in treating osteoporosis and cancers. With the ability to produce high-resolution images with a lower radiation dose, cone beam computed tomography (CBCT) is an emerging technology in maxillofacial imaging that offers several advantages in evaluating MRONJ. This review aims to summarise the radiological features of MRONJ as observed via CBCT and highlight its advantages over two-dimensional plain films in assessing MRONJ. CBCT has the capability to detect early MRONJ lesions, characterise the extent and nature of lesions, distinguish MRONJ from other osseous pathologies, and assist in treatment planning. By leveraging the advantages of CBCT, clinicians can enhance their understanding of MRONJ, improve decision making, and ultimately optimize patient care.

Objective: The aim of the present study is to identify a more reliable reference point in three-dimensional cephalometric analysis to replace the Porion point used in two-dimensional analysis, enhancing the accuracy of assessments. Methods: The methodology assessed potential alternative landmarks for three-dimensional cephalometric analysis. Utilizing a segmenting technique, anatomical landmarks were accurately pinpointed from the external acoustic meatus of 26 Cone Beam Computed Tomography (CBCT) scans. These landmarks were chosen for their clear and unambiguous detectability. To assess reproducibility, each landmark was replicated twice with a one-week interval by a master's student. Reproducibility was quantitatively evaluated by analyzing the absolute difference per axis. Results: Five possible candidate landmarks were identified: the most anterior, posterior, superior, and inferior points of the external acoustic meatus (EAM) and a notch delineating the epitympanic recess. The reproducibility of pinpointing these landmarks ranged from 0.56 mm to 2.2 mm. The absolute mean differences between measurements were 0.46 mm (SD 0.75) for the most anterior point, 0.36 mm (SD 0.44) for the most posterior point, 0.25 mm (SD 0.26) for the most superior point, 1.11 mm (SD 1.03) for the most inferior point, and 0.78 mm (SD 0.57) for the epitympanic notch. Conclusions: The most superior point of the EAM might successfully replace the Porion as an anatomical reference.

Diagnostic reference levels (DRLs) are intended to improve patient safety and ensure that patient ionizing radiation doses are as low as reasonably achievable. The purpose of this dosimetry study was to establish regional DRL levels for cone-beam computed tomography (CBCT) imaging for specialty endodontics. Another aim was to compare phantom-measured ionizing radiation dose index 1 (DI1) index doses to the manufacturer-provided dose area product (DAP) radiation output values for each of the CBCT machines studied, to ascertain their degree of correlation. DAP refers to the dose area product, a measure of radiation dose monitoring which represents the dose within the beam times the area within the beam at that position.

A thimble ionization chamber and polymethyl methacrylate phantom were used to obtain DI1 values using the SEDENTEXTCT method from 21 different CBCT units. DRLs were calculated based on the 75th percentile (third quartile) of the median output values.

The proposed DRL from the CBCT units surveyed has a DAP value of 838 mGy cm2 and a DI1 value of 3.924 mGy. DAP versus DI1 values of 500.6 mGy cm2 versus 2.006 mGy, and 838 mGy cm2 versus 3.906 mGy represented the third quartile of the median values for the 4-cm × 4-cm and 5-cm × 5-cm field of views (FOVs), respectively.

The DI1 and DAP values strongly correlated when 3 outlier CBCT machines (J Morita Veraview X800) using a novel 360° (full rotation) acquisition mode were excluded. The importance of selectable exposure parameters as directly related to ionizing radiation output is illustrated among the CBCT units surveyed. Although the actual FOV that is selected is ultimately dictated by the specific clinical requirements, a 4-cm × 4-cm FOV is recommended for specialist endodontics practice, whenever clinically practical, based on the decreased ionizing radiation output, as compared to that from a 5-cm × 5-cm FOV.

The efficacy of root canal treatment is greatly impacted by a thorough understanding of root canal anatomy. This systematic review and meta-analysis aim to thoroughly investigate the root morphology and canal configuration (RMCC) of permanent premolars (PMs).

A comprehensive analysis was conducted following the PRISMA guidelines. Literature exploration was carried out across four electronic databases (PubMed, Embase, Cochrane, and Web of Science). The risk of bias assessment was conducted for the included studies utilizing the Anatomical Quality Assessment (AQUA) tool. Data analysis was performed utilizing SPSS and RevMAN5.3.3. The meta-analysis was applied with a 95% confidence interval to calculate odds ratios (OR).

Among the 82 selected studies, 59 studies exhibited potential bias in domain one (objective(s) and subject characteristics), followed by domain three (methodology characterization). The majority of maxillary PM1s had either single root (46.7%) or double roots (51.9%), while three-rooted variants were uncommon (1.4%). Conversely, most other PMs exhibited a single root. In terms of canal configuration, maxillary PM1s predominantly featured double distinct canals (87.2%), with the majority of maxillary PM2s displaying either a single canal (51.4%) or double canals (48.3%). Mandibular PMs were primarily characterized by single canals, accounting for 78.3% of mandibular PM1s and 90.3% of mandibular PM2s. Subgroup analyses revealed higher incidences of single-rooted and single-canalled PMs among Asians compared to Caucasians. Additionally, women exhibited a higher incidence of single-rooted PMs, while men showed a greater frequency of double-rooted PMs.

The comprehensive analysis indicated that maxillary PM1s predominantly possess double roots and double canals, whereas maxillary PM2s and mandibular PMs were primarily characterized by single-rooted with a single canal. Notably, single root and single canal were more prevalent among women and Asian samples.

To objectively quantify results of sagittal lip changes following Abbe flap reconstruction in patients with bilateral cleft lip.

Retrospective, observational study.

Single institution, 8-year retrospective review.

In total, 17 patients with bilateral cleft lip that underwent Abbe flap reconstruction were included in this study.

Patients had lateral photographs taken prior to Abbe flap reconstruction and at least 8 months post-Abbe flap.

Vegter's index, Sushner's S2 line and Burstone's B line reference lines were used for evaluation of sagittal lip changes. Wilcoxon signed rank tests were used in analysis.

The mean pre-Abbe flap upper to lower lip ratio, defined as Vegter's Lip Index, was 0.906 compared to a mean of 0.946 following Abbe flap reconstruction. The mean upper to lower lip ratio for Sushner's S2 and Burstone's B line exhibited an increase in upper lip sagittal projection from -0.164 to 1.459 and 0.259 to 0.957, respectively (P < 0.001).

This study quantifies sagittal changes to upper and lower lip position after Abbe flap reconstruction. These findings may aid in operative planning and patient/caregiver expectations during counseling.

Considering the potential image compromise and diagnostic challenges posed by metals, this study aimed to assess the efficacy of the metal artifact reduction (MAR) tool in cone-beam computed tomography examinations for detecting furcation lesions in upper molars treated endodontically and restored with different intracanal posts.

This ex vivo study used 45 endodontically treated maxillary first molars, categorized into the following3 groups (n = 15): control (without intracanal post), metal post, and fiberglass post. Simulations were conducted in the laboratory to replicate alveolar bone, periodontal ligament, and grade I, II, and III furcation lesions. Cone-beam computed tomography scans were obtained with and without the MAR tool, and the furcation lesions were evaluated considering a 5-point Likert scale. Data were analyzed at 5%.

In the control group, there was no influence of MAR (P > .05); grade II lesions were not diagnosed, and grade III lesions were the most detected (P < .05). In the metal post group with MAR, grade III lesions were diagnosed more frequently than I and II (P < .05) and grade III without MAR (P < .05). In the fiberglass post group, the diagnosis of grade I lesions decreased with MAR (P < .05), and without MAR, grade III was most diagnosed (P < .05); grade III lesions were the most diagnosed (P < .05).

The MAR tool was only effective for diagnosing grade III furcation lesions, regardless of the intracanal material. Its application for grade I and II lesions did not contribute to improved diagnosis. Furthermore, in the fiberglass post group with grade I lesions, the MAR tool negatively affected the detection of the lesions.

The present study aims to evaluate a three-dimensional (3D) changes in the crestal bone levels (buccally, lingually/palatally, mesially, and distally) and in the thickness of keratinized tissue around single or multiple implants using cone-beam computed tomography (CBCT) after 1 year.

Twenty-eight implants were placed in the posterior load-bearing areas in 10 patients. The crestal bone levels and the thickness of keratinized tissue surrounding the edentulous area were assessed preoperatively, immediately after implant placement, and 1 year after implant placement using CBCT (3D imaging technique with DICOM software (Carestream Health, Rochester, NY)). Implant stability quotient (ISQ) was measured immediately after implant placement using resonance frequency analysis (RFA) (Penguin RFA Monitor Osseointegration, Integration Diagnostics Sweden AB, Furstenbergsgatan 4 416 64 Göteborg, Sweden).

The average crestal bone loss around the implants after 1 year was 0.78 ± 0.26 mm on the buccal side, 0.63 ± 0.27 mm on the lingual side, 0.57 ± 0.18 mm on the mesial side, and 0.53 ± 0.28 mm on the distal side. The average amount of bone loss including all sites was 0.63 ± 0.17 mm and the mean change in keratinized tissue thickness after 1 year was 0.3 ± 0.19 mm. The RFA ranged from 75 to 82 Nm for all the implants immediately after placement.

CBCT can be used as a reliable source, as it is compararively more superior and precise than intraoral periapical radiographs in measuring the changes in the bone and thickness of the keratinized tissue before and after implant placement. A thick biotype of the keratinized tissue is as important as the bone topography for the success of the implant. ISQ measurements immediately after implant placement can also act as a major factor in depicting the success of the implant in the future.

Advances in digital radiography for both intraoral and panoramic imaging and cone-beam computed tomography have led the way to an increase in diagnostic capabilities for the dental care profession. In this article, the authors provide information on 4 emerging technologies with promise.

The authors feature the following: artificial intelligence in the form of deep learning using convolutional neural networks, dental magnetic resonance imaging, stationary intraoral tomosynthesis, and second-generation cone-beam computed tomography sources based on carbon nanotube technology and multispectral imaging. The authors review and summarize articles featuring these technologies.

The history and background of these emerging technologies are previewed along with their development and potential impact on the practice of dental diagnostic imaging. The authors conclude that these emerging technologies have the potential to have a substantial influence on the practice of dentistry as these systems mature. The degree of influence most likely will vary, with artificial intelligence being the most influential of the 4.

The readers are informed about these emerging technologies and the potential effects on their practice going forward, giving them information on which to base decisions on adopting 1 or more of these technologies. The 4 technologies reviewed in this article have the potential to improve imaging diagnostics in dentistry thereby leading to better patient care and heightened professional satisfaction.

This study evaluated the effect of metal artefact reduction (MAR) level and tube current on the assessment of dental implant positioning relative to the mandibular canal (MC) through cone-beam computed tomography (CBCT).

Titanium dental implants were placed in dried mandibles at 0.5-mm superior to the MC (group 1/n = 8) and 0.5-mm inside the MC with perforation of the cortex (group 2/n = 10). CBCT scans were obtained with different levels of MAR (off, medium, and high) and 2 tube currents (4 and 8 mA). Four examiners analysed the images and scored the contact between the implant and the MC using a 5-point scale. Sensitivity, specificity, area under receiver operating characteristic curve (ROC), and frequency of scores were calculated. Data were compared with analysis of variance 2-way and Tukey's test and scores with Chi-square test.

Specificity and area under ROC curve decreased significantly when MAR level was high compared with MAR-medium and MAR-off. The frequency of score 3 (inconclusive) was the highest, and scores 1 and 5 (definitely no contact and definitely contact, respectively) were the lowest with MAR-high, regardless of the tube current. When MAR was off, there were higher frequencies of scores 1 and 5.

The level of MAR influences the assessment of the relationship between the dental implant and the MC. MAR-high led to lower diagnostic accuracy compared with MAR-medium and off.

This article shows that high level of MAR can interfere in the diagnostic of dental implant positioning relative to the MC, decreasing its accuracy.

The aim of this systematic review was to verify the accuracy of linear measurements performed on low-dose CBCT protocols for implant planning, in comparison with those performed on standard and high-resolution CBCT protocols.

The literature search included four databases (Pubmed, Web of Science, Embase, and Scopus). Two reviewers independently screened titles/abstracts and full texts according to eligibility criteria, extracted the data, and examined the methodological quality. Risk of bias assessment was performed using the Quality Assessment Tool For In Vitro Studies. Random-effects meta-analysis was used for pooling measurement error data.

The initial search yielded 4684 titles. In total, 13 studies were included in the systematic review, representing a total of 81 samples, while 9 studies were included in the meta-analysis. The risk of bias ranged from medium to low. The main results across the studies indicate a strong consistency in linear measurements performed on low-dose images in relation to the reference methods. The overall pooled planning measurement error from low-dose CBCT protocols was -0.24 mm (95% CI, -0.52 to 0.04) with a high level of heterogeneity, showing a tendency for underestimation of real values. Various studies found no significant differences in measurements across different protocols (eg, voxel sizes, mA settings, or dose levels), regions (incisor, premolar, molar) and types (height vs. width). Some studies, however, noted exceptions in measurements performed on the posterior mandible.

Low-dose CBCT protocols offer adequate precision and accuracy of linear measurements for implant planning. Nevertheless, diagnostic image quality needs must be taken into consideration when choosing a low-dose CBCT protocol.

Periapical lesions of teeth are typically evaluated using periapical X-rays (PA) or cone-beam computer tomography (CBCT); however, ultrasound imaging (US) can also be used to detect bone defects. A comparative analysis is necessary to establish the diagnostic accuracy of US for the detection of periapical lesions in comparison with PA and CBCT.

This study aimed to evaluate and compare the measurement precision of US against PA and CBCT in detecting periapical lesions.

This study included 43 maxillary and mandibular teeth with periapical lesions. All teeth were examined clinically, radiographically, and ultrasonographically. Observers evaluated and measured the periapical lesions on CBCT, PA, and US images.

The comparison of lesion size showed that it differs significantly between the different methods of examination. A statistically significant difference was found between CBCT and US (mean difference = 0.99 mm, 95% CI [0.43-1.55]), as well as between CBCT and PA (mean difference = 0.61 mm, 95% CI [0.17-1.05]). No difference was found between the US and PA methods (p = 0.193).

US cannot replace PA radiography in detecting pathologies but it can accurately measure and characterize periapical lesions with minimal radiation exposure. CBCT is the most precise and radiation-intensive method so it should only be used for complex cases.

To investigate the prevalence of incidental findings and need for further dental treatment and analyse the influence of size of field-of-view (FOV) and age in cone beam computed tomography (CBCT) for pre-implant planning.

404 CBCT scans were examined retrospectively for incidental findings and need for further dental treatment. Incidental finding-frequencies and need for further treatment were assessed for different age (< 40 years, 40-60 years, > 60 years) and FOV groups (small, medium, large). Intraexaminer and interexaminer agreements were evaluated.

In 82% of the scans at least one incidental finding was found, with a total of 766 overall. More incidental findings were found in scans with large FOV (98% vs. 72%, OR = 22.39 large vs. small FOV, p < 0.0001) and in scans of patients > 60 years (OR = 5.37 patient's age > 60 years vs. < 40 years, p = 0.0003). Further dental treatment due to incidental findings was needed in 31%. Scans with large FOV were more likely to entail further treatment (OR = 3.55 large vs. small FOV, p < 0.0001). Partial edentulism and large FOV were identified as risk factors for further treatment (p = 0.0003 and p < 0.0001). Further referral of the patient based on incidental findings was judged as indicated in 5%. Intra- and inter-examiner agreements were excellent (kappa = 0.944/0.805).

A considerable number of incidental findings with need for further dental treatment was found in partially edentulous patients and in patients > 60 years. In pre-implant planning of elderly patients, the selection of large FOV CBCT scans, including dentoalveolar regions not X-rayed recently, help to detect therapeutically relevant incidental findings.

This study aimed to evaluate the incidence and distribution of alveolar bone dehiscence and fenestration in skeletal Class III malocclusions with different vertical growth patterns in the anterior region using cone-beam computed tomography (CBCT).

In this retrospective study, 84 patients with skeletal Class III malocclusions who underwent CBCT were selected. This study included 28 patients with hypodivergence (mean age, 22.9 ± 3.9 years), 28 with normodivergence (mean age, 21.0 ± 3.0 years), and 28 with hyperdivergence (mean age, 21.0 ± 3.7 years). Teeth in the anterior region were examined using CBCT to detect dehiscence and fenestration. The incidences of dehiscence and fenestration in the anterior teeth region were recorded, and statistical analysis was conducted using SPSS software (version 25.0, IBM, Armonk, NY).

Among the patients with skeletal Class III malocclusions, dehiscence and fenestration were prone to occur in the mandible. Dehiscence and fenestration were more prevalent in patients with hyperdivergence compared with in patients with hypodivergence and normodivergence.

Dehiscence and fenestration are prevalent among patients with skeletal Class III malocclusion. Furthermore, the occurrence of alveolar bone defects is higher in patients with hyperdivergence.

Applications of cone-beam CT (CBCT) in orthodontics have been increasingly discussed and evaluated in science and practice over the last two decades. The present work provides a comprehensive summary of current consolidated practice guidelines, cutting-edge innovative applications, and future outlooks about potential use of CBCT in orthodontics with a special focus on upper airway analysis in patients with sleep-disordered breathing. The present scoping review reveals that clinical applications of CBCT in orthodontics are broadly supported by evidence for the diagnosis of dental anomalies, temporomandibular joint disorders, and craniofacial malformations. On the other hand, CBCT imaging for upper airway analysis-including soft tissue diagnosis and airway morphology-needs further validation in order to provide better understanding regarding which diagnostic questions it can be expected to answer. Internationally recognized guidelines for CBCT use in orthodontics are existent, and similar ones should be developed to provide clear indications about the appropriate use of CBCT for upper airway assessment, including a list of specific clinical questions justifying its prescription.

This paper provides a comprehensive review of the established concepts and newer developments related to computer-assisted implant rehabilitation.

Two independent researchers searched the English literature published to 31st December 2023 in the PubMed/Medline database for primary and secondary research and related publications on computer-assisted implant planning, computer-assisted implant placement and computer-assisted implant restoration.

A total of 58,923 papers were identified, 198 relevant papers were read in full text and 110 studies were finally included. Computer-assisted implant rehabilitation was found to result in more precise implant positioning than freehand placement. Advantages include reduced trauma and surgery time; disadvantages include reduced primary implant stability and higher cost.

Computer-assisted surgery is particularly indicated in cases of critical anatomy, but may encounter limitations in terms of cost, restricted mouth opening, visibility and adjustment of the surgical guides and the need for prior familiarisation with the procedure. Nonetheless, this surgical technique reduces the post-implant placement complication rate.

Cone-beam CT (CBCT) is a promising tool with increasing applications in musculoskeletal imaging due to its ability to provide thin-section CT images of the appendicular skeleton and introduce weight bearing, which accounts for loading forces that typically interact with and affect this anatomy. CBCT devices include an x-ray source directly opposite a digital silicon detector panel that performs a single rotation around an object of interest, obtaining thin-section images. Currently, the majority of research has been focused on the utility of CBCT with foot and ankle pathologic abnormalities, due to the complex architectural arrangement of the tarsal bones and weight-bearing nature of the lower extremities. Associated software can provide a variety of options for image reconstruction, including metal artifact reduction, three-dimensional biometric measurements, and digitally reconstructed radiographs. Advancements in this technology have allowed imaging of the knee, hip, hand, and elbow. As more data are published, it is becoming evident that CBCT provides many additional benefits, including fast imaging time, low radiation dose, lower cost, and small equipment footprint. These benefits allow placement of CBCT units outside of the traditional radiology department, including the orthopedic clinic setting. These technologic developments have motivated clinicians to define the scope of CBCT for diagnostics, surgical planning, and longitudinal imaging. As efforts are made to create standardized protocol and measurements, the current understanding and surgical approach for various orthopedic pathologic conditions will continue to shift, with the hope of improving outcomes. ©RSNA, 2024 Test Your Knowledge questions for this article are available in the supplemental material.

Background: The aim was to assess three-dimensionally mandibular and maxillary changes in growing Class II patients treated with removable functional appliances followed by fixed appliances. Methods: Twenty-four Class II patients (age range: 9 to 14, mean: 12.1 ± 1.1 years) treated with removable functional appliances followed by fixed appliances (functional appliance group-FAG) were retrospectively selected and compared to an age-matched control group (CG) treated with fixed appliances only. To be included in the study, pre- and post-treatment CBCT scans had to be available. The CBCTs were used to analyze, in 3D, the changes following treatment and growth. Results: Before treatment, overjet (FAG: 9 mm ± 2.8 (mean ± standard deviation); CG: 4 mm ± 1.7), ANB (FAG: 5.7° ± 2.0; CG: 3.2° ± 1.4), and effective mandibular length (FAG: 113.0 mm ± 4.1; CG: 116.6 mm ± 5.9) were statistically significantly different between the two groups. After treatment, overjet (FAG: -6.8 mm ± 2.8; CG: -1.8 mm ± 1.8) and effective mandibular length (FAG: 6.3 mm ± 2.6; CG: 3.9 mm ± 2.6) statistically significantly changed. There was a significant difference in the treatment effect between the FAG and the CG in overjet, ANB, and effective mandibular length. Conclusions: The results indicate that functional appliances are effective in correcting Class II malocclusions. The growth modification in the FAG resulted in an increase in mandibular length. Yet, the final length of the mandible in the FAG was smaller when compared to the CG.

The utilization of regenerative techniques in periodontology involves tailoring tissue engineering principles to suit the oral cavity's unique environment. Advancements in computer-assisted technology, specifically utilizing cone beam computed tomography (CBCT), enabled the fabrication of 3D-printed scaffolds. The current review aims to explore whether 3D-printed scaffolds are effective in promoting osteogenesis in patients with periodontal defects.

A thorough exploration was undertaken across seven electronic databases (PubMed, Scopus, ScienceDirect, Google Scholar, Cochrane, Web of Science, Ovid) to detect pertinent research in accordance with specified eligibility criteria, aligning with the PRISMA guidelines. Two independent reviewers undertook the screening and selection of manuscripts, executed data extraction, and evaluated the bias risk using the Newcastle-Ottawa Scale for non-randomized clinical trials and SYRCLE's risk of bias tool for animal studies.

Initially, 799 articles were identified, refined by removing duplicates. After evaluating 471 articles based on title and abstract, 18 studies remained for full-text assessment. Eventually, merely two manuscripts fulfilled all the eligibility criteria concerning human trials. Both studies were prospective non-randomized clinical trials. Moreover, 11 animal studies were also included.

The use of multidimensional, 3D-printed, customized scaffolds appears to stimulate periodontal regeneration. While the reported results are encouraging, additional studies are required to identify the ideal characteristics of the 3D scaffold to be used in the regeneration of periodontal tissue.

The treatment of osseous defects around teeth is a fundamental concern within the field of periodontology. Over the years, the method of grafting has been employed to treat bone defects, underscoring the necessity for custom-designed scaffolds that precisely match the anatomical intricacies of the bone cavity to be filled, preventing the formation of gaps that could allow the regeneration of soft tissues. In order to create such a patient-specific scaffold (bone graft), it is imperative to have a highly detailed 3D representation of the bone defect, so that the resulting scaffold aligns with the ideal anatomical characteristics of the bone defect. In this context, this article implements a workflow for designing 3D models out of patient-specific tissue defects, fabricated as scaffolds with 3D-printing technology and bioabsorbable materials, for the personalized treatment of periodontitis. The workflow is based on 3D modeling of the hard tissues around the periodontal defect (alveolar bone and teeth), scanned from patients with periodontitis. Specifically, cone beam computed tomography (CBCT) data were acquired from patients and were used for the reconstruction of the 3D model of the periodontal defect. The final step encompasses the 3D printing of these scaffolds, employing Fused Deposition Modeling (FDM) technology and 3D-bioprinting, with the aim of verifying the design accuracy of the developed methodοlogy. Unlike most existing 3D-printed scaffolds reported in the literature, which are either pre-designed or have a standard structure, this method leads to the creation of highly detailed patient-specific grafts. Greater accuracy and resolution in the macroarchitecture of the scaffolds were achieved during FDM printing compared to bioprinting, with the standard FDM printing profile identified as more suitable in terms of both time and precision. It is easy to follow and has been successfully employed to create 3D models of periodontal defects and 3D-printed scaffolds for three cases of patients, proving its applicability and efficiency in designing and fabricating personalized 3D-printed bone grafts using CBCT data.

This study investigated the adoption of cone-beam computed tomography (CBCT) by dentists and endodontists around the world, including their preferences in endodontic CBCT usage.

An online questionnaire surveyed dental association members in Australia and New Zealand, and endodontic association members in Australia, Britain, Canada, Italy, New Zealand and the USA, about their CBCT training history, considerations in acquisition/interpretation, access to and usage of CBCT, preferred scan interpreter, and preferred endodontic scan settings. Data were analysed with Chi-squared, independent sample t-tests, Cochran's Q and McNemar's tests.

Responses from 578 endodontic specialists or postgraduates (Group E) and 185 non-endodontic dentists (Group NE) were included. Continuing professional education (CPE) was the most common source of CBCT training (69.2%). Factors considered in CBCT acquisition/interpretation included beam hardening (75.4%), radiation exposure (61.1%) and patient movement (58.3%). Group E reported higher CBCT usage (90.8%) than Group NE (45.4%, p < .001) and greater workplace access to CBCT (81.1% vs. 25.9%, p < .001). Scans were interpreted by the respondent in most workplace scans (83.3%) and externally taken scans (60.5%); Group E were significantly more likely to interpret themselves than Group NE. Small field of view (83.6%) and high resolution (86.6%) were most preferred as settings for endodontic CBCTs; Group NE were less likely to choose these settings. There were some geographic variations within Group E.

CBCT training was most commonly acquired via CPE. Endodontic respondents reported very high CBCT usage and access in the workplace. There are educational implications regarding CBCT limitations, appropriate applications and interpretation.

The intrusion of anterior teeth is a routine procedure in orthodontics, which has been performed efficiently with the help of mini-screws in the anterior region, especially the upper maxilla. This study aimed to investigate the effect of insertion angle and sociodemographic features on the success rate of mini-screws at the anterior maxillary region.

Twenty-nine patients (18 Females and 11 Males) aged 18-40 years old were involved in the current study. A split-mouth design was carried out in which recruited patients needed bilateral anterior screws at the labial bone in the region of the incisor for the intrusion of upper anterior incisor teeth as part of their orthodontic treatment with a fixed appliance (upper right side received 90-degree insertion angle mini-screw and 45° for left side) using a surgical guide fabricated from patients CBCT and intraoral scans. The mini-screws were inserted at the attached gingiva bilaterally to achieve intrusion of upper anterior teeth with a power chain ligated from the main archwire to the anterior min-implants. The patient was recalled monthly for orthodontic appliance activation and screw assessment for 6 months. The intrusion force was 15 g on each side.

The results of the study showed that screw stability was higher in the male group than the female group at the 6th monthly follow-up visit with a statistically significant difference between both genders (P = .044). Concerning insertion angle, results showed a statistically significant difference between 45° and 90° as an insertion angle with a P-value <.01 in most of the follow-up months.

This study found that male patients with mini-screws inserted at 90° showed greater screw stability over time.

Implantology represents the therapy of choice for the rehabilitation of a partially or totally edentulous jaw in a healthy patient. Nowadays, it is possible to exploit of modern preoperative planning software, increasingly precise radiographic examinations (CBCT) and CAD/CAM technologies that allow designing devices directly on the computer to be sent to a milling center which produces the desired product, such as stereolithographic templates.

The prospective clinical study in question aims to evaluate the accuracy between two different surgical guides using peek and metal guide bushings. Twenty-nine implants were placed: for the control group, 17 3i, T3 implants were used, while for the test group, 12 Xive S plus implants were used.

The result obtained shows that the deviations in the distribution of the control group and the test group are the same in the apical-coronal, vestibulo-palatal and mesio-distal direction. For the control group, the mean deviation was 1.394±0.644923 at the entry point of the implants and 1.85655±1.0765 at the most apical point of the implants. For the test group the mean deviation was 1.10157±0.312721 at the entry point of the implants and 1.54514±0.572100 at the most apical point of the implants.

The peek guide bushings have the same deviation as the metal ones. There is no difference in the method used, but precision must be sought in other elements, such as the patient's anatomy and maximum precision in the guide production phase.

Missing anatomy is one of the main causes of endodontic failures, and accurate knowledge of teeth anatomy is a prerequisite for adequate root canal treatment. The aim of the present cone beam computed tomography (CBCT) study was to describe the anatomical characteristics of the mesiobuccal (MB) root canals of maxillary molars and to understand if a correlation exists between the position of the canal orifices and the anatomical features of the root.

For the purposes of the study, a total of 100 CBCT scans of maxillary molars with two MB canals were selected and studied. The features of root canal anatomy of the MB root of the same teeth were analyzed and recorded (root length, confluence, and Vertucci classification). The distance between MB1 and MB2 orifices and the palatal orifice were recorded, as well as the distance between the orifices and the line joining the palatal orifice and the others. A statistical analysis was performed by providing descriptive measures, the measure of the correlation between different parameters, and the influence of some of these measures on the presence of a confluence between MB1 and MB2.

It resulted that the most frequent configuration is type II Vertucci. The length measured on the sagittal plane was significantly correlated to the presence of a confluence in the MB root. When the root length was higher than 14.56 mm, the confluence is three times more frequent than when the length is lower (OR = 3.635). The area under the curve (AUC) of the receiver operator characteristic (ROC) curve for length on the sagittal plane was 0.632 (P=0.036).

The presence of a confluence between the MB canals of maxillary molars is correlated to the length of the root that could be measured on the sagittal plane and to the distance between the canal orifices. The relative position of the root canal orifices in relation to anatomic landmarks needs to be further explored.

To assess the accuracy of CBCT in implant-supported prostheses and to evaluate metal artifacts with and without implants or implant prostheses. Accuracy and artifacts were assessed in the dried mandible at three points on the buccal and lingual cortical plates on the mandible's body near the crest and the base. On the buccal cortical plate, these points were labelled as A, B and C near the crest and D, E and F near the base of the body of the mandible. Similarly, points a to f were marked on the lingual cortical plate corresponding to points A to F. The study had two control groups, C0 for physical linear measurement (PLM) and C1 for radiographic linear measurement (RLM) and artifact assessment. There were seven test groups, TG 1 to 7, progressing from a single implant to implant full-arch prosthesis. For accuracy assessment, PLM was compared to RLM. CBCT artifacts were investigated in images integrated at 0.25 mm, 10 mm, and 20 mm at regions of interest on concentric circles at different intersecting angles by comparing grayscale values at C1 and TG1 to 7. The data were collected and statistically analyzed. A significant difference was observed between C0 and C1, and RLM in test groups at the superior axial plane. Similarly, PLM and test RLM in the sagittal plane at A-B, B-C, and D-E were statistically significant. A significant difference between PLM and RLM was also observed in the vertical plane at A-D, B-E, and C-F. Quantification of CBCT artifacts in the presence of implants or prostheses revealed that full-arch prostheses had the highest mean grayscale value, whereas single implants with a prosthesis had the lowest. The mean grayscale change was greatest around the implant and implant prosthesis. The mean grayscale value was maximum at 20 mm voxel integration scales (VIS) and lowest at 0.25 mm. CBCT is a clinically reliable device. Metal in implants or implant-supported prostheses prevents true assessment of the peri-implant area; therefore, lower VIS is suggested in the presence of implants or implant prostheses.