| For: | Puccio FD, Mattei L. Biotribology of artificial hip joints. World J Orthop 2015; 6(1): 77-94 [PMID: 25621213 DOI: 10.5312/wjo.v6.i1.77] |
|---|---|
| URL: | https://www.wjgnet.com/2218-5836/full/v6/i1/77.htm |
| Number | Citing Articles |
| 1 |
Suchi Mercy George, Chinmayee Nayak, Indrajeet Singh, Kantesh Balani. Multifunctional Hydroxyapatite Composites for Orthopedic Applications: A Review. ACS Biomaterials Science & Engineering 2022; 8(8) doi: 10.1021/acsbiomaterials.2c00140
|
| 2 |
Leiming Gao, Xianjiu Lu, Xiaogang Zhang, Qingen Meng, Zhongmin Jin. Lubrication Modelling of Artificial Joint Replacements: Current Status and Future Challenges. Lubricants 2022; 10(10) doi: 10.3390/lubricants10100238
|
| 3 |
Kristal Bornillo, Marco Sorgato, Giovanni Lucchetta. Optimizing two-photon polymerization for rapid and high-resolution prototyping of low-friction microtextured surfaces. Progress in Additive Manufacturing 2025; 10(9) doi: 10.1007/s40964-025-00947-3
|
| 4 |
Markus Heß, Fabian Forsbach. An Analytical Model for Almost Conformal Spherical Contact Problems: Application to Total Hip Arthroplasty with UHMWPE Liner. Applied Sciences 2021; 11(23) doi: 10.3390/app112311170
|
| 5 |
Amit Choudhari, Ashish Kumar Gupta, Abhishek Kumar, Avinash Kumar, Ashutosh Gupta, Nusrat Chowdhury, Ashwani Kumar. Applications of Biotribology in Biomedical Systems. 2024; doi: 10.1007/978-3-031-58327-8_13
|
| 6 |
Lorenza Mattei, Francesca Di Puccio, Thomas J. Joyce, Enrico Ciulli. Numerical and experimental investigations for the evaluation of the wear coefficient of reverse total shoulder prostheses. Journal of the Mechanical Behavior of Biomedical Materials 2016; 55 doi: 10.1016/j.jmbbm.2015.10.007
|
| 7 |
Göksu Kandemir, Simon Smith, Thomas J Joyce. The influence of contact stress on the wear of cross-linked polyethylene. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 2018; 232(10) doi: 10.1177/0954411918796047
|
| 8 |
Lucia Kölle, Gregory Pryce, Andrew R. Beadling, Michael Bryant, Richard M. Hall, Stephen J. Ferguson, Benedikt Helgason, Amitava Mukherjee. Advanced preclinical testing of a design-optimized ceramic bearing for a cervical total disc replacement. PLOS One 2026; 21(2) doi: 10.1371/journal.pone.0339851
|
| 9 |
|
| 10 |
Cong-Truyen Duong, Cong-Dat Le, Duc-Nam Nguyen. 7th International Conference on the Development of Biomedical Engineering in Vietnam (BME7). IFMBE Proceedings 2020; 69 doi: 10.1007/978-981-13-5859-3_45
|
| 11 |
G. M. Eremina, A. Yu. Smolin. Numerical modeling of the mechanical behavior of hip resurfacing endoprosthesis and healthy bone. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019 2019; 2167 doi: 10.1063/1.5131954
|
| 12 |
Huizhen Zhang, Gang Cheng, Xianlei Shan, Feng Guo. Kinematic accuracy research of 2(3HUS+S) parallel manipulator for simulation of hip joint motion. Robotica 2018; 36(9) doi: 10.1017/S0263574718000073
|
| 13 |
David Nečas, Hatsuhiko Usami, Tatsuya Niimi, Yoshinori Sawae, Ivan Křupka, Martin Hartl. Running-in friction of hip joint replacements can be significantly reduced: The effect of surface-textured acetabular cup. Friction 2020; 8(6) doi: 10.1007/s40544-019-0351-x
|
| 14 |
Zhiyuan Yu, Liangchi Zhang. Design of low wear artificial hip joint considering 3D physiological loading and motion. Wear 2023; 523 doi: 10.1016/j.wear.2023.204744
|
| 15 |
|
| 16 |
Göksu Kandemir, Andrew Bowey, Cyrus Jensen, Thomas J. Joyce. Explant analysis of a Discocerv cervical disc: A case study for a ceramic-on-ceramic cervical disc. Journal of the Mechanical Behavior of Biomedical Materials 2022; 135 doi: 10.1016/j.jmbbm.2022.105473
|
| 17 |
Eko Saputra, Iwan Budiwan Anwar, Rifky Ismail, J. Jamari, Emile van der Heide. Study of Unipolar and Bipolar Hip Prostheses Using Finite Element Simulation: Contact Stress Analysis. Key Engineering Materials 2017; 739 doi: 10.4028/www.scientific.net/KEM.739.96
|
| 18 |
V. Peretti, S. Ferraris, G. Gautier, C. Hellmich, O. Lahayne, B. Stella, S. Yamaguchi, S. Spriano. Surface treatments for boriding of Ti6Al4V alloy in view of applications as a biomaterial. Tribology International 2018; 126 doi: 10.1016/j.triboint.2018.05.006
|
| 19 |
Rajeshkumar G, Mohammed Nasrullah H, Nithesh Kanna S, Santhosh Kumar, Vignesh M. Hip Implant Design using Stainless Steel 316L for Enhanced Stability and Patient Comfort. International Journal of Civil, Environmental and Agricultural Engineering 2024; doi: 10.34256/ijceae2324
|
| 20 |
Ehsan Askari, Michael S. Andersen. A dynamic model of polyethylene damage in dry total hip arthroplasties: wear and creep. Multibody System Dynamics 2019; 45(4) doi: 10.1007/s11044-018-09652-2
|
| 21 |
K. Nitish Prasad, Madaparthi Abhilash, P. Ramkumar. A Neural Network Solution for Comprehensive Contact Analysis in Hard-On-Hard Hip Implants. Journal of Tribology 2026; 148(5) doi: 10.1115/1.4071014
|
| 22 |
Silvia Logozzo, Maria Cristina Valigi. Proceedings of I4SDG Workshop 2021. Mechanisms and Machine Science 2022; 108 doi: 10.1007/978-3-030-87383-7_43
|
| 23 |
Huizhen Zhang, Gang Cheng, Xianlei Shan, Yang Li. Singularity-free path optimization of the parallel test mechanism for artificial hip joints. Journal of Mechanical Science and Technology 2018; 32(4) doi: 10.1007/s12206-018-0334-2
|
| 24 |
Effects of femoral head diameter on the predicted acetabular cup wear volume of CP-Ti and UHMWPE hip implants. Journal of Physics: Conference Series 2019; 1218(1) doi: 10.1088/1742-6596/1218/1/012012
|
| 25 |
Vidushi Sharma, Rajeev K Gupta, Satish V Kailas, Bikramjit Basu. Probing lubricated sliding wear properties of HDPE/UHMWPE hybrid bionanocomposite. Journal of Biomaterials Applications 2022; 37(2) doi: 10.1177/08853282221085633
|
| 26 |
Nishant Nikam, Satish Shenoy B., Sawan Shetty, Shyamasunder Bhat N., Laxmikant G. Keni, Chethan K. N., Şenay Mihçin. Biomechanics, Material Performance, and Wear Analysis in Total Hip Arthroplasty: A Review. Surgeries 2025; 7(1) doi: 10.3390/surgeries7010007
|
| 27 |
Amit Aherwar, Amar Patnaik, Marjan Bahraminasab. Effect of Molybdenum Content on Structure and Properties of a Co-Cr Biomedical Alloy. Journal of Materials Engineering and Performance 2019; 28(10) doi: 10.1007/s11665-019-04356-w
|
| 28 |
Giorgio Perino, Ivan De Martino, Lingxin Zhang, Zhidao Xia, Jiri Gallo, Shonali Natu, David Langton, Monika Huber, Anastasia Rakow, Janosch Schoon, Enrique Gomez-Barrena, Veit Krenn. The contribution of the histopathological examination to the diagnosis of adverse local tissue reactions in arthroplasty. EFORT Open Reviews 2021; 6(6) doi: 10.1302/2058-5241.6.210013
|
| 29 |
In-Ju Kim. Engineering Metrology for Pedestrian Falls Prevention and Protection. 2022; doi: 10.1007/978-3-030-95746-9_5
|
| 30 |
Nur Hidayah Shahemi, Shahira Liza, Yoshinori Sawae, Takehiro Morita, Hironori Shinmori, Yazid Yaakob. Effects of surface wettability and thermal conductivity on the wear performance of ultrahigh molecular weight polyethylene/graphite and ultrahigh molecular weight polyethylene/graphene oxide composites. Polymers for Advanced Technologies 2022; 33(6) doi: 10.1002/pat.5651
|
| 31 |
Manish Rajkumar Kukreja, K. Nitish Prasad, P. Ramkumar. Investigation of wear in CoCrMo hip implants under realistic loading conditions: A contact mechanics-based experimental approach. Tribology International 2026; 220 doi: 10.1016/j.triboint.2026.111932
|
| 32 |
Christian Lozano, S. Samundeeswari, Guillermo Araujo-Espinoza, Saseendar Shanmugasundaram. Handbook of Orthopaedic Trauma Implantology. 2023; doi: 10.1007/978-981-15-6278-5_53-1
|
| 33 |
Muhammad Imam Ammarullah, Muhammad Kozin, Mohamad Izzur Maula, M. Danny Pratama Lamura, Hasyid Ahmad Wicaksono, Athanasius Priharyoto Bayuseno, Jamari Jamari, Muhammad Hanif Ramlee. A review of enhanced total hip prosthesis design and material bearing combination to accommodate Muslim prayer (Salat) movements: Biomechanical, biotribological, and biological perspectives. Tribology International 2025; 205 doi: 10.1016/j.triboint.2025.110518
|
| 34 |
Juan-Carlos Baena, Zhongxiao Peng. Dispersion state of multi-walled carbon nanotubes in the UHMWPE matrix: Effects on the tribological and mechanical response. Polymer Testing 2018; 71 doi: 10.1016/j.polymertesting.2018.08.023
|
| 35 |
Shankar Swarup Das, Prasun Chakraborti, Prakash Kumar Sarangi. Fabrication and selection of suitable biomaterials for acetabular liner of hip implants by using TOPSIS method. Materials Today: Proceedings 2021; 47 doi: 10.1016/j.matpr.2021.03.403
|
| 36 |
Lorenza Mattei, Francesca Di Puccio, Enrico Ciulli, Andreas Pauschitz. Experimental investigation on wear map evolution of ceramic-on-UHMWPE hip prosthesis. Tribology International 2020; 143 doi: 10.1016/j.triboint.2019.106068
|
| 37 |
Anurag Roy, Annette Bennett, Lisa Pruitt. Feasibility of using diamond-like carbon films in total joint replacements: a review. Journal of Materials Science: Materials in Medicine 2024; 35(1) doi: 10.1007/s10856-024-06814-x
|
| 38 |
P. Jeyalakshmi, P. Ramkumar. Failure mechanisms and influencing factors on orthopaedic knee implant failure – A comprehensive review. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 2025; 239(3) doi: 10.1177/13506501241288733
|
| 39 |
Muhammad Imam Ammarullah, Abdulfatah Abdu Yusuf, Mohamad Izzur Maula, M. Danny Pratama Lamura, Budi Setiyana, Mohammad Tauviqirrahman, Athanasius Priharyoto Bayuseno, Jamari Jamari, Muhammad Hanif Ramlee. Finite Element‐Based Wear Prediction Using Archard's Law for Single Mobility Bearing of Total Hip Prosthesis During Walking: A Literature Review. Engineering Reports 2026; 8(2) doi: 10.1002/eng2.70628
|
| 40 |
Alessandro Ruggiero, Alessandro Sicilia, Saverio Affatato. In silico total hip replacement wear testing in the framework of ISO 14242-3 accounting for mixed elasto-hydrodynamic lubrication effects. Wear 2020; doi: 10.1016/j.wear.2020.203420
|
| 41 |
Sarah N Powell, Ahmed Nadeem-Tariq, Sarah Kazemeini, Catilin Wetzel, Elizabeth Theirl, Hannah Peterson, Aditya Pancholi, Dylan Fischer. Tribological Failure in Modern Total Hip Arthroplasty: A Narrative Review of Third-Body Wear, Oxidative Degradation, and Cross-Linked Polyethylene Longevity. Cureus 2026; doi: 10.7759/cureus.104167
|
| 42 |
Vito Basile, Francesco Modica, Rossella Surace, Irene Fassi. Micro-texturing of molds via Stereolithography for the fabrication of medical components. Procedia CIRP 2022; 110 doi: 10.1016/j.procir.2022.06.019
|
| 43 |
Spyridon Papagiannis, Irini Tatani, George Kyriakopoulos, Zinon Kokkalis, Panagiotis Megas, Constantinos Stathopoulos, Katerina Grafanaki, John Lakoumentas. Alterations in Small Non-coding MicroRNAs (miRNAs) and the Potential Role in the Development of Aseptic Loosening After Total Hip Replacement: Study Protocol for an Observational, Cross-Sectional Study. Cureus 2024; doi: 10.7759/cureus.72179
|
| 44 |
Cong-Truyen Duong, Duc-Nam Nguyen. 8th International Conference on the Development of Biomedical Engineering in Vietnam. IFMBE Proceedings 2022; 85 doi: 10.1007/978-3-030-75506-5_14
|
| 45 |
Alessandro Ruggiero, Massimiliano Merola, Saverio Affatato. Finite Element Simulations of Hard-On-Soft Hip Joint Prosthesis Accounting for Dynamic Loads Calculated from a Musculoskeletal Model during Walking. Materials 2018; 11(4) doi: 10.3390/ma11040574
|
| 46 |
Kaveh Moghadasi, Mohammad Syahid Mohd Isa, Mohammad Ashraf Ariffin, Muhammad Zulhiqmi Mohd jamil, Sufian Raja, Bo Wu, Mehrdad Yamani, Mohd Ridha Bin Muhamad, Farazila Yusof, Mohd Fadzil Jamaludin, Mohd Sayuti bin Ab Karim, Bushroa binti Abdul Razak, Nukman bin Yusoff. A review on biomedical implant materials and the effect of friction stir based techniques on their mechanical and tribological properties. Journal of Materials Research and Technology 2022; 17 doi: 10.1016/j.jmrt.2022.01.050
|
| 47 |
Songyun Liu, Deborah J. Hall, Craig J. Della Valle, Michael J. Walsh, Joshua J. Jacobs, Robin Pourzal. Simultaneous Characterization of Implant Wear and Tribocorrosion Debris within its Corresponding Tissue Response Using Infrared Chemical Imaging. Biotribology 2021; 26 doi: 10.1016/j.biotri.2021.100163
|
| 48 |
Jorge Gómez-Álvarez, Ignacio Miranda, Alejandro Álvarez-Llanas, Juan F. Lisón, Francisco Bosch-Morell, Julio Doménech. Influence of Physical Activity and Cup Orientation on Metal Ion Release and Oxidative Stress in Metal-on-Metal and Ceramic-on-Metal Total Hip Arthroplasty. Journal of Clinical Medicine 2024; 13(2) doi: 10.3390/jcm13020527
|
| 49 |
Ahmed Abdelbary, Li Chang. Principles of Engineering Tribology. 2023; doi: 10.1016/B978-0-323-99115-5.00015-3
|
| 50 |
Dipankar Choudhury, Martin Vrbka, Azuddin Bin Mamat, Ian Stavness, Chanchal K. Roy, Rajshree Mootanah, Ivan Krupka. The impact of surface and geometry on coefficient of friction of artificial hip joints. Journal of the Mechanical Behavior of Biomedical Materials 2017; 72 doi: 10.1016/j.jmbbm.2017.05.011
|
| 51 |
Mohamed Taha, Ahmed Fouly, Hany S. Abdo, Ibrahim A. Alnaser, Ragab Abouzeid, Ahmed Nabhan. Unveiling the Potential of Rice Straw Nanofiber-Reinforced HDPE for Biomedical Applications: Investigating Mechanical and Tribological Characteristics. Journal of Functional Biomaterials 2023; 14(7) doi: 10.3390/jfb14070366
|
| 52 |
Jérémy Sarrazin, Marion Halbaut, Pierre Martinot, Sophie Putman, Henri Migaud, Julien Girard. Are CPR (Contact Patch to Rim) distance anomalies associated with the occurrence of abnormal noises from ceramic-on-ceramic THA?. Orthopaedics & Traumatology: Surgery & Research 2023; 109(1) doi: 10.1016/j.otsr.2022.103438
|
| 53 |
Eric A. Lewallen, Dakota L. Jones, Amel Dudakovic, Roman Thaler, Christopher R. Paradise, Hilal M. Kremers, Matthew P. Abdel, Sanjeev Kakar, Allan B. Dietz, Robert C. Cohen, David G. Lewallen, Andre J. van Wijnen. Osteogenic potential of human adipose-tissue-derived mesenchymal stromal cells cultured on 3D-printed porous structured titanium. Gene 2016; 581(2) doi: 10.1016/j.gene.2016.01.015
|
| 54 |
Liangliang Li, Jun Fu, Chi Xu, Ming Ni, Wei Chai, Libo Hao, Yonggang Zhou, Jiying Chen. Fourth‐Generation Ceramic‐on‐Ceramic THA in Patients with Ankylosing Spondylitis: A Minimum 10‐Year Follow‐Up. Orthopaedic Surgery 2022; 14(5) doi: 10.1111/os.13259
|
| 55 |
Witold Brostow, Hanna Fałtynowicz, Osman Gencel, Andrei Grigoriev, Haley E. Hagg Lobland, Danny Zhang. Mechanical and Tribological Properties of Polymers and Polymer-Based Composites. Chemistry & Chemical Technology 2020; 14(4) doi: 10.23939/chcht14.04.514
|
| 56 |
Qingen Meng, Jing Wang, Peiran Yang, Zhongmin Jin, John Fisher. The lubrication performance of the ceramic-on-ceramic hip implant under starved conditions. Journal of the Mechanical Behavior of Biomedical Materials 2015; 50 doi: 10.1016/j.jmbbm.2015.06.001
|
| 57 |
Young-Kyun Lee, Byung-Ho Yoon, Yun Seong Choi, Woo-Lam Jo, Yong-Chan Ha, Kyung-Hoi Koo. Metal on Metal or Ceramic on Ceramic for Cementless Total Hip Arthroplasty: A Meta-Analysis. The Journal of Arthroplasty 2016; 31(11) doi: 10.1016/j.arth.2016.04.014
|
| 58 |
Paul F. Lachiewicz, Lindsay T. Kleeman, Thorsten Seyler. Bearing Surfaces for Total Hip Arthroplasty. Journal of the American Academy of Orthopaedic Surgeons 2018; 26(2) doi: 10.5435/JAAOS-D-15-00754
|
| 59 |
João Costa, Joaquim Peixoto, Pedro Moreira, António Pedro Souto, Paulo Flores, Hamid M. Lankarani. Influence of the Hip Joint Modeling Approaches on the Kinematics of Human Gait. Journal of Tribology 2016; 138(3) doi: 10.1115/1.4031988
|
| 60 |
Yaling Deng, Lei Nie, Yu Xu, Tao Liu. In-situ construction silver nanoparticles embedded in PEI/PAA polyelectrolyte multilayer films on titanium alloy substrate for bio-tribological applications. Tribology International 2025; 201 doi: 10.1016/j.triboint.2024.110228
|
| 61 |
C. D. Resendiz-Calderon, A. Molina-Sanchez, L. Santos-Zea, I. Campos-Silva, L. I. Farfan-Cabrera. Tribological Assessment of Hip Implant Tribopairs Using a Non-Conformal Sliding Test in Simulated Body Fluid. Journal of Materials Engineering and Performance 2026; 35(19) doi: 10.1007/s11665-025-12996-4
|
| 62 |
Juan-Carlos Baena, Zhongxiao Peng. Mechanical and tribological performance of UHMWPE influenced by temperature change. Polymer Testing 2017; 62 doi: 10.1016/j.polymertesting.2017.06.017
|
| 63 |
Mônica Rufino Senra, Maria de Fátima Vieira Marques, Sergio Neves Monteiro. Poly (Ether-Ether-Ketone) for Biomedical Applications: From Enhancing Bioactivity to Reinforced-Bioactive Composites—An Overview. Polymers 2023; 15(2) doi: 10.3390/polym15020373
|
| 64 |
Marwa Dahmani, Mamoun Fellah, Mohamed Nasser, Mohamed-Cherif Benoudia, Hezil Naouel, Obrosov Aleksei, Gamal A. El-Hiti, Noushi Zaidi, Sabine Weiss. Enhancement of structural, physical and tribological behaviors of newly developed Ti–25Nb–25Mo beta-type for biomedical applications. Journal of Science: Advanced Materials and Devices 2025; 10(3) doi: 10.1016/j.jsamd.2025.100952
|
| 65 |
Huizhen Zhang, Gang Cheng, Shibiao Chen, Feng Guo, Xianlei Shan. Stiffness modeling and performance evaluation of 2(3HUS +S) parallel manipulator. 2018 3rd International Conference on Advanced Robotics and Mechatronics (ICARM) 2018; doi: 10.1109/ICARM.2018.8610777
|
| 66 |
Vidushi Sharma, Sheetal Chowdhury, Nandita Keshavan, Bikramjit Basu. Six decades of UHMWPE in reconstructive surgery. International Materials Reviews 2023; 68(1) doi: 10.1080/09506608.2022.2047419
|
| 67 |
Alessandro Ruggiero, Roberto D’Amato, Nicolae Ungureanu, Saverio Affatato. Advances in Manufacturing Engineering and Materials II. Lecture Notes in Mechanical Engineering 2021; doi: 10.1007/978-3-030-71956-2_31
|
| 68 |
Francesco Modica, Vito Basile, Rossella Surace, Irene Fassi. Replication Study of Molded Micro-Textured Samples Made of Ultra-High Molecular Weight Polyethylene for Medical Applications. Micromachines 2023; 14(3) doi: 10.3390/mi14030523
|
| 69 |
Christian M. Lozano, S. Samundeeswari, Guillermo Araujo-Espinoza, Saseendar Shanmugasundaram. Handbook of Orthopaedic Trauma Implantology. 2023; doi: 10.1007/978-981-19-7540-0_53
|
| 70 |
David E. Lunn, Anthony C. Redmond, Graham J. Chapman, Morten E. Lund, Stephen J. Ferguson, Enrico De Pieri. Hip contact force pathways in total hip replacement differ between patients and activities of daily living. Journal of Biomechanics 2024; 176 doi: 10.1016/j.jbiomech.2024.112309
|
| 71 |
Atef Boulila, Lanouar Bouzid, Mahfoudh Ayadi. Wear and loosening in THA: results from a multidirectional simulator. Biomedical Engineering Letters 2026; 16(2) doi: 10.1007/s13534-025-00536-x
|
| 72 |
Ricarda Merfort, Nicola Maffulli, Ulf Krister Hofmann, Frank Hildebrand, Francesco Simeone, Jörg Eschweiler, Filippo Migliorini. Head, acetabular liner composition, and rate of revision and wear in total hip arthroplasty: a Bayesian network meta-analysis. Scientific Reports 2023; 13(1) doi: 10.1038/s41598-023-47670-z
|
| 73 |
C. L. Lebudi, R. R. Phiri, T. Leso, O. P. Oladijo. Effect of Heat Treatment Hardening on the Dry Sliding Wear Behaviour of Mild Steel. MRS Advances 2020; 5(23-24) doi: 10.1557/adv.2020.72
|
| 74 |
Enrico De Pieri, Federica Atzori, Stephen J Ferguson, Sebastian Dendorfer, Michael Leunig, Martin Aepli. Contact force path in total hip arthroplasty: effect of cup medialisation in a whole-body simulation. HIP International 2021; 31(5) doi: 10.1177/1120700020917321
|
| 75 |
Geng Hou, Liangchi Zhang. In-situ detection of lubrication status of bearings with acoustic emission monitoring. Wear 2025; 571 doi: 10.1016/j.wear.2025.205839
|
| 76 |
V. Peretti, A. Bari, S. Ferraris, G. Gautier, B. Stella, A. M. Tortora, S. Spriano. Proceedings of the 7th International Conference on Fracture Fatigue and Wear. Lecture Notes in Mechanical Engineering 2019; doi: 10.1007/978-981-13-0411-8_64
|
| 77 |
William B. Bennett, Min Zou. Small Laser-Textured Dimples for Improved Tribological Performance of CoCrMo in Artificial Hip Joints. Lubricants 2025; 13(4) doi: 10.3390/lubricants13040158
|
| 78 |
K. Nitish Prasad, P. Ramkumar. Effectiveness of analytical methods in predicting non-linear contact conditions in hard-on-hard hip implants. International Journal of Mechanics and Materials in Design 2025; 21(4) doi: 10.1007/s10999-025-09759-3
|
| 79 |
Daniel Donaire Hoyas, Eladio Jiménez Mejías, Jesús Moreta, Manuel Sumillera García, Alberto Albert Ullibarri, Jorge Albareda Albareda. A Comparison Between Two Bearing Surfaces for Total Hip Arthroplasty—Ceramic-on-Ceramic and Metal–Polycarbonate–Urethane—A Pseudo-Randomized Study. Journal of Functional Biomaterials 2025; 16(10) doi: 10.3390/jfb16100371
|
| 80 |
Ejay Nsugbe, Khadijat Olorunlambe, Karl Dearn. On the Early and Affordable Diagnosis of Joint Pathologies Using Acoustic Emissions, Deep Learning Decompositions and Prediction Machines. Sensors 2023; 23(9) doi: 10.3390/s23094449
|
| 81 |
J Jamari, Athanasius Priharyoto Bayuseno, Chethan K N, M Danny Pratama Lamura, Eko Saputra, Rifky Ismail, Muhammad Imam Ammarullah, Taufiq Hidayat. Investigation of contact behavior on a model of the dual-mobility artificial hip joint for Asians in different inner liner thicknesses. World Journal of Orthopedics 2024; 15(4): 321-336 doi: 10.5312/wjo.v15.i4.321
|
| 82 |
Marzena Lachowicz, Ziemisław Stępniewski, Monika Morawska-Kochman, Maciej Lachowicz. The use of porous alumina bioceramics to repair bone defects in the aspect of long-term success of hip arthroplasty. Orthopedic Reviews 2025; 17 doi: 10.52965/001c.144080
|
| 83 |
Running-in behavior of dual-mobility cup during the gait cycle: A finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 2024; 238(1) doi: 10.1177/09544119231216023
|
| 84 |
Rilo Berdin Taqriban, Ismoyo Haryanto, Dwi Basuki Wibowo, Rifky Ismail. Hip Joint Implant Loading During Routine Activities of Elderly Indonesian. 2021 IEEE International Biomedical Instrumentation and Technology Conference (IBITeC) 2021; doi: 10.1109/IBITeC53045.2021.9649050
|
| 85 |
Magnus F. Grüner, Frederik Bojsen-Møller, Thomas L. Christiansen, Marcel A.J. Somers, Morten S. Jellesen. Toward CoCr Alternatives: Tribo-corrosion performance of interstitially strengthened Cp-Ti surfaces. Journal of the Mechanical Behavior of Biomedical Materials 2025; 172 doi: 10.1016/j.jmbbm.2025.107145
|
| 86 |
Göksu Kandemir, Simon Smith, Thomas J. Joyce. Wear behaviour of CFR PEEK articulated against CoCr under varying contact stresses: Low wear of CFR PEEK negated by wear of the CoCr counterface. Journal of the Mechanical Behavior of Biomedical Materials 2019; 97 doi: 10.1016/j.jmbbm.2019.05.022
|
| 87 |
Hamidreza Farhoudi, Reza Oskouei, Ali Pasha Zanoosi, Claire Jones, Mark Taylor. An Analytical Calculation of Frictional and Bending Moments at the Head-Neck Interface of Hip Joint Implants during Different Physiological Activities. Materials 2016; 9(12) doi: 10.3390/ma9120982
|
| 88 |
Philipp G. Grützmacher, Andreas Rosenkranz, Adam Szurdak, Florian König, Georg Jacobs, Gerhard Hirt, Frank Mücklich. From lab to application - Improved frictional performance of journal bearings induced by single- and multi-scale surface patterns. Tribology International 2018; 127 doi: 10.1016/j.triboint.2018.06.036
|
| 89 |
Hatice AKÇA, Osman İYİBİLGİN, Engin GEPEK. Biyomalzemeler ile İmplant Üretimi Sürecinin Biyotriboloji Yönünden Değerlendirilmesi. Düzce Üniversitesi Bilim ve Teknoloji Dergisi 2020; 8(1) doi: 10.29130/dubited.482400
|
| 90 |
Md. Shahinoor Alam. Tribology in recent biomedical engineering: a review. Material Science & Engineering International Journal 2021; 5(4) doi: 10.15406/mseij.2021.05.00165
|
| 91 |
B. Sh. Minasov, R. R. Yakupov, L. Sh. Shuster, S. V. Chertovskikh, I. I. Emaev, G. N. Filimonov, A. A. Korshunov, T. E. Khairov. Comparative Study of the Adhesive Component of Friction in Hip Endoprostheses. Vestnik travmatologii i ortopedii imeni N.N. Priorova 2016; (1) doi: 10.32414/0869-8678-2016-1-71-75
|
| 92 |
K.N. Chethan, B. Satish Shenoy, N. Shyamasunder Bhat. Role of different orthopedic biomaterials on wear of hip joint prosthesis: A review. Materials Today: Proceedings 2018; 5(10) doi: 10.1016/j.matpr.2018.06.468
|
| 93 |
S. J. Bull, N. Moharrami, D. Langton. Mechanistic Study of the Wear of Ceramic Heads by Metallic Stems in Modular Implants. Journal of Bio- and Tribo-Corrosion 2017; 3(1) doi: 10.1007/s40735-016-0066-8
|
| 94 |
Mhd Ayham Darwich, Hasan Mhd Nazha, Hiba Mohsen Ghadir, Ahmad Salamah. Biotribological Wear Prediction of Alumina–Polymer Hip Prostheses Using Finite Element Analysis. Applied Mechanics 2025; 6(3) doi: 10.3390/applmech6030046
|
| 95 |
M. Berni, G. Marchiori, A. Gambardella, M. Boi, M. Bianchi, A. Russo, A. Visani, M. Marcacci, P.G. Pavan, N.F. Lopomo. Effects of working gas pressure on zirconium dioxide thin film prepared by pulsed plasma deposition: roughness, wettability, friction and wear characteristics. Journal of the Mechanical Behavior of Biomedical Materials 2017; 72 doi: 10.1016/j.jmbbm.2017.05.006
|
| 96 |
J Jamari, E Saputra, I B Anwar, R Ismail, E V D Heide. Finite Element Study of the Effect of UHMWPE Liner Thickness on the Contact Area and Stress Distribution in a Bipolar Hip Joint. IOP Conference Series: Materials Science and Engineering 2017; 202 doi: 10.1088/1757-899X/202/1/012095
|
| 97 |
Eko Saputra, Iwan Budiwan Anwar, J. Jamari, Emile van der Heide. Reducing Contact Stress of the Surface by Modifying Different Hardness of Femoral Head and Cup in Hip Prosthesis. Frontiers in Mechanical Engineering 2021; 7 doi: 10.3389/fmech.2021.631940
|
| 98 |
Joseph A. Abboud, Brian W. Hill. Glenohumeral Osteoarthritis in the Young Patient. 2022; doi: 10.1007/978-3-030-91190-4_13
|
| 99 |
K. Nitish Prasad, P. Ramkumar. Effect of geometrical, operational and material parameters in the lubrication regime of hard-on-hard hip implants. Materials Chemistry and Physics 2024; 317 doi: 10.1016/j.matchemphys.2024.129171
|
| 100 |
Kristin M. Warren, Md. Mydul Islam, Philip R. LeDuc, Robert Steward. 2D and 3D Mechanobiology in Human and Nonhuman Systems. ACS Applied Materials & Interfaces 2016; 8(34) doi: 10.1021/acsami.5b12064
|
| 101 |
Ehsan Askari. Mathematical models for characterizing non-Hertzian contacts. Applied Mathematical Modelling 2021; 90 doi: 10.1016/j.apm.2020.08.048
|
| 102 |
Michael A. Stone, Ali S. Noorzad, Surena Namdari, Joseph Abboud. Prosthetic Bearing Surfaces in Anatomic and Reverse Total Shoulder Arthroplasty. Journal of the American Academy of Orthopaedic Surgeons 2021; 29(10) doi: 10.5435/JAAOS-D-20-00166
|
| 103 |
|
| 104 |
Ignacio Miranda, Caterina Chiappe, Rocío Valverde-Vázquez, Francisco J. Miranda, Julio Doménech. Outcomes following primary total hip arthroplasty with ceramic-on-metal and metal-on-metal bearings. Archives of Orthopaedic and Trauma Surgery 2025; 145(1) doi: 10.1007/s00402-025-06053-x
|
| 105 |
Alessandro Ruggiero, Alessandro Sicilia. A Mixed Elasto-Hydrodynamic Lubrication Model for Wear Calculation in Artificial Hip Joints. Lubricants 2020; 8(7) doi: 10.3390/lubricants8070072
|
| 106 |
B. Sh Minasov, R. R Yakupov, L. Sh Shuster, S. V Chertovskikh, I. I Emaev, G. N Filimonov, A. A Korshunov, T. E Khairov. Comparative Study of the Adhesive Component of Friction in Hip Endoprostheses. N.N. Priorov Journal of Traumatology and Orthopedics 2016; 23(1) doi: 10.17816/vto201623171-75
|
| 107 |
A. C. Messellek, M. Ould Ouali, Y. Benabid, A. Amrouche, A. Beloulla. Design optimization and material selection of acetabular component of hip prosthesis using computational concepts. Computer Methods in Biomechanics and Biomedical Engineering 2017; 20(sup1) doi: 10.1080/10255842.2017.1382896
|
| 108 |
M. Kalayarasan, S. Shankar, M. Manikandan, K. Adithan. Mechanical loading characteristics of total hip prosthetics subjected to dynamic loading cycles. Bio-Medical Materials and Engineering 2018; 29(6) doi: 10.3233/BME-181019
|
| 109 |
D. Nečas, M. Vrbka, F. Urban, J. Gallo, I. Křupka, M. Hartl. In situ observation of lubricant film formation in THR considering real conformity: The effect of diameter, clearance and material. Journal of the Mechanical Behavior of Biomedical Materials 2017; 69 doi: 10.1016/j.jmbbm.2016.12.018
|
| 110 |
Ehsan Askari, Michael S Andersen. A closed-form formulation for the conformal articulation of metal-on-polyethylene hip prostheses: Contact mechanics and sliding distance. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 2018; 232(12) doi: 10.1177/0954411918810044
|
| 111 |
Sanne van der Poel, Marek Mezera, Gert-willem Römer, Erik de Vries, Dave Matthews. Fabricating Laser-Induced Periodic Surface Structures on Medical Grade Cobalt–Chrome–Molybdenum: Tribological, Wetting and Leaching Properties. Lubricants 2019; 7(8) doi: 10.3390/lubricants7080070
|
| 112 |
Asghar Shirani, Nicholas Nunn, Olga Shenderova, Eiji Osawa, Diana Berman. Nanodiamonds for improving lubrication of titanium surfaces in simulated body fluid. Carbon 2019; 143 doi: 10.1016/j.carbon.2018.12.005
|
| 113 |
Ahmed Abdelbary, Li Chang. Principles of Engineering Tribology. 2023; doi: 10.1016/B978-0-323-99115-5.00005-0
|
| 114 |
Hongzhi Yue, Johannes Schneider, Bettina Frohnapfel, Peter Gumbsch. The influence of pin inclination on frictional behaviour in pin-on-disc sliding and its implications for test reliability. Tribology International 2024; 200 doi: 10.1016/j.triboint.2024.110083
|
| 115 |
J. Gallo, E. Gibon, S.B. Goodman. Materials for Bone Disorders. 2017; doi: 10.1016/B978-0-12-802792-9.00004-5
|
| 116 |
Jérémy Sarrazin, Marion Halbaut, Pierre Martinot, Sophie Putman, Henri Migaud, Julien Girard. Les anomalies de la distance ZCR (zone de contact et rebord) sont-elles associées à l’apparition de bruits sur les prothèses de hanche à couple céramique-céramique de 4e génération ?. Revue de Chirurgie Orthopédique et Traumatologique 2023; 109(1) doi: 10.1016/j.rcot.2022.10.004
|
| 117 |
Assessment of polyethylene wear in dual mobility implant for Asians on various head-to-liner ratios: A finite-element analysis. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 2024; 238(8) doi: 10.1177/13506501241240021
|