De Maria E, Borghi A, Bonetti L, Fontana PL, Cappelli S. Riata silicone defibrillation lead with normal electrical measures at routine ambulatory check: The role of high-voltage shock testing. World J Cardiol 2016; 8(11): 657-666 [PMID: 27957252 DOI: 10.4330/wjc.v8.i11.657]
Corresponding Author of This Article
Elia De Maria, MD, PhD, Chief of Arrhythmology Lab, Cardiology Unit, Ramazzini Hospital, Via Molinari 1, 41012 Carpi (Modena), Italy. e.demaria@inwind.it
Research Domain of This Article
Cardiac & Cardiovascular Systems
Article-Type of This Article
Observational Study
Open-Access Policy of This Article
This article is an open-access article which was selected by an in-house editor and fully peer-reviewed by external reviewers. It is distributed in accordance with the Creative Commons Attribution Non Commercial (CC BY-NC 4.0) license, which permits others to distribute, remix, adapt, build upon this work non-commercially, and license their derivative works on different terms, provided the original work is properly cited and the use is non-commercial. See: http://creativecommons.org/licenses/by-nc/4.0/
Baishideng Publishing Group Inc, 7041 Koll Center Parkway, Suite 160, Pleasanton, CA 94566, USA
Share the Article
De Maria E, Borghi A, Bonetti L, Fontana PL, Cappelli S. Riata silicone defibrillation lead with normal electrical measures at routine ambulatory check: The role of high-voltage shock testing. World J Cardiol 2016; 8(11): 657-666 [PMID: 27957252 DOI: 10.4330/wjc.v8.i11.657]
World J Cardiol. Nov 26, 2016; 8(11): 657-666 Published online Nov 26, 2016. doi: 10.4330/wjc.v8.i11.657
Riata silicone defibrillation lead with normal electrical measures at routine ambulatory check: The role of high-voltage shock testing
Elia De Maria, Ambra Borghi, Lorenzo Bonetti, Pier Luigi Fontana, Stefano Cappelli
Elia De Maria, Ambra Borghi, Lorenzo Bonetti, Pier Luigi Fontana, Stefano Cappelli, Cardiology Unit, Ramazzini Hospital, 41012 Carpi (Modena), Italy
Author contributions: De Maria E contributed to concept design, data analysis/interpretation, drafting the article, critical revision, approval, statistics and data collection; Borghi A, Bonetti L, Fontana PL, Cappelli S contributed to drafting the article, critical revision, approval, statistics and data collection.
Institutional review board statement: The study was approved by the Institutional Board of our Department (Ethical Committee of Modena Province, Italy).
Informed consent statement: Patient’s consent was obtained.
Conflict-of-interest statement: The authors report no relationships that could be construed as a conflict of interest.
Data sharing statement: Technical appendix, statistical code, dataset available from the corresponding author at e.demaria@inwind.it.
Correspondence to: Elia De Maria, MD, PhD, Chief of Arrhythmology Lab, Cardiology Unit, Ramazzini Hospital, Via Molinari 1, 41012 Carpi (Modena), Italy. e.demaria@inwind.it
Telephone: +39-059-659320 Fax: +39-059-659387
Received: June 2, 2016 Peer-review started: June 4, 2016 First decision: July 5, 2016 Revised: July 21, 2016 Accepted: September 21, 2016 Article in press: September 22, 2016 Published online: November 26, 2016 Processing time: 174 Days and 22.4 Hours
Core Tip
Core tip: The management of Riata™ defibrillator leads is complex and optimal treatment is often carried out on individual basis. These leads are prone to a unique failure mechanism: The conductors can externalize through the silicone insulation (“inside-out” abrasion) and appear outside the lead body leading to electrical failure. The potential role of high-voltage shock testing for these leads has been poorly studied, only sparse reports being available. In Riata™ leads the delivery of a low current during routine measurement of high-voltage impedance may not reveal a small short circuit, that can only be evident by attempting to deliver a true shock, either for spontaneous arrhythmias or in the context of a shock testing. Defibrillation testing (or alternatively synchronized shock) should be considered an important tool to check Riata™ integrity.
